|
Physical Stats
Form Factor ATX
Dimensions 12" x 9.6 ", (30.5cm x 24.4 cm)
Processor/Cache
Single LGA775 Socket
Supports Intel® Core™2 Extreme QX9000/QX6000 series
Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series
Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
Supports Intel® Pentium® E5000/E2000 series
Supports Intel® Celeron® E1000 and 400 series
System Bus
1333 / 1066 / 800 MHz system bus
System Memory
Memory Capacity
Four 240-pin DIMM sockets
Supports up to 8 GB of unbuffered, non-ECC DDR2 800/667MHz memory (Dual Channel)
Memory Type
DDR2 800/667MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs
DIMM Sizes
256 MB, 512 MB, 1 GB, 2 GB
Memory Voltage
1.8V only
On-Board Devices
Chipset
Intel G35
ICH9DO
Serial ATA
Intel® ICH9DO SATA2 (3 Gbps) controller built-in
RAID 0, 1, 5, 10 support (Windows Only)
RAID 0, 1, 10 support (Linux)
Network Controllers
1 x Intel® 82566DM & Intel® 82573L Dual Port Gigabit PCI-Express Ethernet
Supports 10 BASE-T, 100 BASE-TX, and 1000 BASE-T with RJ45 output
Audio
Realtek ALC883 High Definition 5.1 Channel Audio
Super I/O
2 x Winbond 83627DHG chips
Clock Generator
CK505
Input / Output
Serial ATA
Six Serial ATA ports (3Gbps)
Six SATA hard drives supported
IDE
One EIDE channel supports up to two UDMA IDE devices
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
LAN
2x RJ45 LAN port
USB
12x USB 2.0 / 1.1 compatible
(6x rear ports + 2x on-board + 2x headers)
Audio
High Definition 5.1 Channel Audio
Line-in / Line-out / Microphone Ports
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Ports
1x Fast UART 16550 serial port
3x Serial Header
Parallel Port
1x Parallel Port Header
|
Chassis ( Optimized for C2SBC-Q)
Mid-Tower
CSE-733E-465B
CSE-733i-465B
CSE-733T-465B
CSE-733TQ-465B
Important Note
To ensure system stability, a 420W (minimum) ATX power supply [4-pin +12V
AND (20 or 24-pin)] is required.
Expansion Slots
PCI-Express
1 (x16) PCI-e slot
1 (x4) PCI-e slot (using x8 slot)
PCI
5x 32-bit 33MHz PCI (5V) slots
System BIOS
BIOS Type
16Mb SPI Flash EEPROM with Phoenix BIOS®
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
Management
Software
SuperDoctor® III
Watch Dog
NMI
Power Configurations
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode control for AC power recovery
Internal / External modem remote ring-on
Suspend to RAM (STR)
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT, HT,
Memory, Chipset.
CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
Adjustable CPU clock frequency ratio (Only available if CPU is supported)
FAN
Total of three 4-pin fan headers
3 x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on / off control
Support 3-pin PWM fans (without speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan conn.
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor 2 (TM2) Support
PECI
LED
CPU / System Overheat LED
+5V standby alert LED
Other Features
Chassis intrusion Detection
Chassis intrusion Header
Operating Environment
Environmental Spec.
Operating Temperature: 0°to 55°C (50°to 95°F)
Non-operating Temperature: -40°to 85°C
Operating Relative Humidity: 15% to 95% (non-condensing)
Non-operating Relative Humidity: 15 to 90% (non-condensing)
|
