Advanced Search

MBD-C2SBA+II

Reference -oicp-mbd-c2sba+II
Rating:0 opinion
549.00€ Exclu. VAT
Quantity : 
+
-
Warranty  Warranty 1 year

ATX Motherboard, Single socket H2 (LGA775),up to 8GB DDR2 800/677 SDRAM, 6 SATA2 (3Gbps), 2 EIDE, 1 PCI-E (x16), 1 PCI-E (x4), 1 PCI-E (x1), 3 PCI (32-bit), 1 Intel Gigabit LAN , up to 12 USB 2.0.

Add to cart
Ask an estimate

MBD-C2SBA+II
Notice

Features


1. Intel® Core™ 2 Duo / Quad processors in LGA775 Package (FSB 1333/1066/800)
2. Intel® P35 + ICH9 Chipset
3. Up to 8GB dual channel unbuffered, non-ECC DDR2 800/667 SDRAM
4. 1x Intel® 82566 Gigabit Ethernet Controller
5. Built-in SATA2 Controller
   6x SATA (3Gbps)
6. 1 (x16) PCI-Express,1 (x4) PCI-Express (using x8 slot), 1 (x1) PCI-Express, 3x 32-bit PCI slots
7. High Definition 7.1 Channel Audio
8. Total 12 USB 2.0 ports : 6 rear + 2 Type A connectors +  2 headers (4 ports)
9. TPM Support

Product description


Physical Stats
Form Factor ATX
Dimensions 12" x 9.6 ", (30.5cm x 24.4 cm)
 
Processor/Cache
Single LGA775 ZIF Socket
Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series
Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
Supports Intel® Pentium® E5000/E2000 series
Supports Intel® Celeron® E1000 and 400 series
System Bus
1333 / 1066 / 800 MHz system bus
 
System Memory
Memory Capacity
Four 240-pin DIMM sockets
Supports up to 8 GB of unbuffered, non-ECC DDR2 800/667MHz memory (Dual Channel)
 
Memory Type
DDR2 800/667MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs
 
DIMM Sizes
256 MB, 512 MB, 1 GB, 2 GB
 
Memory Voltage
1.8V only
 
On-Board Devices
Chipset
Intel G33
ICH9
 
Serial ATA
Intel® ICH9 SATA2 (3 Gbps) controller built-in
RAID 0, 1, 5, 10 support (Windows Only)
RAID 0, 1, 10 support (Linux)
 
Network Controllers
1 x Intel® 82566 Gigabit Ethernet
Supports 10 BASE-T, 100 BASE-TX, and 1000 BASE-T with RJ45 output
 
Audio
High Definition 7.1 Channel Audio
 
Video
On board graphics
 
Super I/O
Winbond 83627DHG chip
 
Clock Generator
CK505
 
Input / Output
Serial ATA
Six Serial ATA ports (3Gbps)
Six SATA hard drives supported
 
IDE
Two EIDE channel supports up to four UDMA IDE devices
ITE 8212F chipset - Rev 1.2 or earlier
ITE 8211F chipset - Rev 1.2A or later
 
Floppy
1 Floppy controller; 1.44 MB
 
LAN
1x RJ45 LAN port
 
USB
12x USB 2.0 / 1.1 compatible
6 rear + 2 Type A connectors + 2 headers (4 ports)
 
Audio
High Definition 7.1 Channel Audio
Line-in / Line-out / Microphone Ports
 
VGA
On board VGA port
 
Keyboard / Mouse
PS/2 keyboard and mouse ports
 
Serial Ports
1x Fast UART 16550 serial port
1x Serial Header
 
Parallel Port
1x ECP / EEP Parallel Port
 
Chassis ( Optimized for C2SBA+II)
Mid-Tower
CSE-733E-465B
CSE-733i-450
CSE-733i-465B
CSE-733i-645
CSE-733T-450
CSE-733T-465B
CSE-733T-645
CSE-733TQ-465B
Tower / 4U Rackmount
CSE-742i-450
Important Note
To ensure system stability, a 420W (minimum) ATX power supply [4-pin +12V
AND (20 or 24-pin)] is required.
 
Expansion Slots
PCI-Express
1 (x16) PCI-e slot
1 (x4) PCI-e slot (using x8 slot)
1 (x1) PCI-e slot
PCI
3x 32-bit 33MHz PCI (5V) slots
 
System BIOS
BIOS Type
16Mb SPI Flash EEPROM with AMI BIOS
 
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
 
Management
Software
SuperDoctor® III
Watch Dog
NMI
Hardware monitor in W83627DHF (PECI support)
 
Power Configurations
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode control for AC power recovery
Internal / External modem remote ring-on
Suspend to RAM (STR)
 
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT
CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
Adjustable CPU clock frequency ratio (Only available if CPU is supported)
 
FAN
Total of five 4-pin fan headers
3 x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on / off control
Support 3-pin PWM fans (without speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan conn.
 
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor 2 (TM2) Support
PECI
 
LED
CPU / System Overheat LED
Standby power alert LED
 
Other Features
Chassis intrusion Detection
Chassis intrusion Header
 
Operating Environment
Environmental Spec.
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
 

 

 

 

 

 

 

Back to top
MBD-C2SBA+II
Notice

Reviews about this MBD-C2SBA+II (0 reviews)

There is no review for this item, add the first one.
[Add your review]
Back to top