|
Chassis ( Optimized for C2SBX+)
Important Note
To ensure system stability, a 420W (minimum) ATX power supply [4-pin +12V
AND (20 or 24-pin)] is required.
Expansion Slots
PCI-Express
2 (x16) PCI-E 2.0 slot
1 (x1) PCI-E slot
PCI-X
2x 64-bit 133 / 100MHz PCI-X (3.3V) slots
PCI
2x 32-bit 33MHz PCI (5V) slots
System BIOS
BIOS Type
16Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
Management
Software
SuperDoctor® III
Watch Dog
NMI
Power Configurations
ACPI/APM Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode control for AC power recovery
Internal / External modem remote ring-on
Suspend to RAM (STR)
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT, HT,
Memory, Chipset.
CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
Adjustable CPU clock frequency ratio (Only available if CPU is supported)
FAN
Total of five 4-pin fan headers
5 x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on / off control
Support 3-pin PWM fans (without speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan conn.
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor 2 (TM2) Support
PECI
LED
CPU / System Overheat LED
Suspend-state indicator LED
+5V standby alert LED
Other Features
Chassis intrusion Detection
Chassis intrusion Header
Operating Environment
Environmental Spec.
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing))
|
