|
Physical Stats
Form Factor ATX
Dimensions 12" x 9.5", (30,5cm x 24,13 cm)
Processor/Cache
CPU
Single mPGA478 ZIF Sockets
Supports an Intel® Pentium® 4 processor with 512KB of integrated Advanced Transfer Cache up to 3.06GHz
Supports an Intel® Celeron® processor with 128KB of integrated Advanced Transfer Cache up to 2.2GHz
System Bus 533 / 400MHz system bus
System Memory
Memory Capacity
Two 184-pin DIMM sockets
Supports up to 2 GB of DDR333/266/200 memory
Memory Type
DDR333/266/200 non-ECC, unbuffered SDRAM, 184-pin gold-plated DIMMs
DIMM Sizes 256 MB, 512 MB, 1 GB
Memory Voltage 2.5 V only
On-Board Devices
Chipset
Intel® 845GE chipset
GMCH + ICH4
Network Controllers
Dual Intel® 82540EM Gigabit Ethernet
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics On-chip Intel® EXTREME Graphics Accelerator
Input / Output
AGP 4x AGP Slot
PCI Expansion
5x 32-bit 33MHz PCI (5V) slots
IDE
Dual EIDE channels support up to four UDMA IDE devices
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
USB Up to 6 USB ports
Infrared
1 Infrared port header
Serial Ports
2 Fast UART 16550 serial ports
Parallel Port
1 ECP / EEP Parallel Port
Floppy
1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
Keyboard / Mouse
PS/2 keyboard and mouse ports
|
|
Chassis ( Optimized for P4SGE )
Mini-1U Chassis
SC512C
1U Chassis
SC811-IDEP4
2U Chassis
SC822S-400LP
Important Note To ensure system stability, a 300W (minimum) ATX power supply
[4-pin +12V AND (20 or 24-pin)] is required.
System BIOS
Bios Type
4Mb Flash EEPROM with AwardBIOS®
BIOS Features
Plug and Play (PnP)
APM 1.2
DMI 2.3 support
PCI 2.2
ACPI 1.0
BIOS rescue hot keys
Hardware BIOS virus protection
USB Keyboard support
Management
Software
SuperDoctor® III
Watch Dog
Power Configurations
ACPI/APM Power Management
Real Time Clock Wake-up Alarm
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Suspend to RAM (STR)
Power-on mode control for AC power loss recovery
Internal/External modem remote ring-on
PC Health Monitoring
Voltage
Monitors for CPU Cores, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT
CPU Core 3-Phase-switching voltage regulator with auto-sense from 1.1V-1.85V
Adjustable CPU clock frequency ratio settings (via BIOS)
FAN
Total of four 3-pin fan headers
3x fans with tachometer monitoring
Status monitor with firmware/software on/off control
Temperature
Monitoring for CPU, chassis, environment
CPU thermal trip support
LED
CPU Overheat LED
System Overheat LED
+5V standby alert LED
Suspend-state indicator LED
Other Features
Chassis intrusion detection
Chassis intrusion header
|
