Advanced Search

MBD-X7DWE

Reference -oicp-mbd-x7dwe
Rating:0 opinion
449.00 € Exclu. VAT
Quantity : 
+
-
Warranty  Warranty 1 year

ATX Motherboard Dual 771-pin LGA Sockets for Intel® Quad & Dual Core 64-bit Xeon processors, up-to 32GB DDR2, 2 Gbe LAN, 6 SATA-II, 6 USB 2.0, IPMI 2.0 slot, VGA

Add to cart

Ask an estimate

MBD-X7DWE
Notice

Features


1. Dual Intel® 64-bit Xeon® Quad-Core or  Dual-Core, with 1600 / 1333 / 1066 MHz FSB
2. Intel® 5400 (Seaburg) Chipset
3. Up to 32GB DDR2 800 / 667 / 533  SDRAM Fully Buffered DIMM  (FB-DIMM) 1.8V or 1.5V supported
4. Intel® 82563EB Dual-port 
   Gigabit Ethernet Controller w/ IOAT
5. 6x SATA 3.0Gbps Ports via ESB2 Controller
6. 4 (x8) PCI-Express (Gen 2.0), 
    1 (x4) PCI-Express (Using x8 slot),
    1 64-bit 133MHz PCI-X, 
    1 UIO slots
7. XGI Z9S Graphics with 32MB video memory
9. IPMI 2.0 (SIMLP) slot
 

Product description


Physicals Stats
Form Factor
ATX
Dimensions
12.05" x 10" (30.6cm x 25.4cm)
 
Processor/Cache
CPU
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
Quad-Core Intel® Xeon®Processor 5400/5300LV sequence (Harpertown/Clovertown processor)
up to 3.20 GHz
Dual-Core Intel® Xeon®Processor 5200/5100LV sequence (Wolfdale/Woodcrest processor)
up to 3.40 GHz
NOTE: Support processors with Max TDP < 100W
 
System Bus
1600 / 1333 / 1066 MHz system bus
 
System Memory
Memory Capacity
Four 240-pin DIMM sockets
Supports up to 32 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
Memory Sparing supported
 
Memory Type
800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs

 

DIMM Sizes
256MB, 512MB, 1GB, 2GB, 4GB, 8GB**
 
Memory Voltage
1.8 V or 1.5 V
 
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
Intel® 5400 (Seaburg) chipset
MCH + ESB2
 
SATA
Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux)
 
IPMI
Support for Intelligent Platform Management Interface v.2.0
200-pin IPMI slot (SIMLP)
(Optional: AOC-SIMLP-B(+))
(Optional: AOC-SIMLP-3(+)) with 3rd LAN support
 
Network Controllers
Intel® 82563EB Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking
 
Graphics
XGI Z9S controller with 32 MB of video memory
 
Super I/O
Winbond 83627HF chip
 
Clock Generator
ICS 401 chip
 
Input / Output
Serial ATA
Six Serial ATA ports
Six SATA hard drives supported
 
IDE
Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
 
Floppy
1 Floppy controller; 1.44 MB
 
LAN
2x RJ45 LAN ports
 
USB
2 rear + 1 Type A connector + 2 headers (4 Ports)
Total 7 USB 2.0 Compliant / 1.1 Compliant
 
VGA
1x VGA Port
 
Keyboard / Mouse
PS/2 keyboard and mouse ports
 
Serial Port / Header
1 Fast UART 16550 serial port
 
Chassis ( Optimized for X7DWE )
 
2U Chassis
SC825TQ-R700LP
SC825TQ-560LP
SC823T-550LP
3U Chassis
SC836TQ-R800
SC836E2-R800
SC836E1-R800
SC833T-R760
SC833T-550
SC933E2-R760
SC933E1-R760
SC933T-R760
Tower / 4U Rackmount
SC745TQ-R800
SC745TQ-700
SC743TQ-R760
SC743T-R760
SC743T-650
Important Chassis Notes
To ensure system stability, a 550W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
 
Expansion Slots
PCI-Express
4 (x8) PCI-Express (Gen 2.0)
1 (x4) PCI-Express (Using x8 slot)
PCI-X
1x 64-bit 133MHz PCI-X
UIO
1x UIO slots
 
System BIOS
BIOS Type
8Mb Flash EEPROM with Phoenix® BIOS
 
BIOS Features
Plug and Play (PnP)
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
 
Management
Software
Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0
SuperDoctor® III
Watch Dog
NMI
 
Power Configurations
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +5V Standby, VBAT, Chipset
Voltages.
4 Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
 
FAN
Total of six 4-pin fan headers supporting up to 6 fans
6x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
 
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x fan connectors
Thermal Monitor 2 (TM2) support
PECI
 
LED
CPU / System Overheat LED
 
Other Features
Chassis intrusion detection
Chassis intrusion header
SDDC Support
 
Operating Environment
Environmental Spec.
Operating Temperature: 10° to 35°C (50° to 95°F)
Non-operating Temperature: -40° to 70°C (-40° to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)

 

Back to top
MBD-X7DWE
Notice

Reviews about this MBD-X7DWE (0 reviews)

pixel_trans
There is no review for this item, add the first one.
pixel_trans
pixel_trans
[Add your review]
Back to top