Physical Stats
Form Factor
Mini-ITX
Dimensions
6.7" x 6.7" (17.02cm x 17.02cm)
Processor/Cache
CPU
Intel® Atom™ D525 processor
System Bus
DMI
System Memory
Memory Capacity
Two 200-pin SO-DIMM sockets
Supports up to 4 GB of unbuffered, non-ECC DDR3 800MHz SO-DIMM (Single Channel)
Some 1066MHz and 1333MHz memory can be used, but willoperate at 800MHz
Memory Type
DDR3 800MHz unbuffered, non-ECC SO-DIMM
DIMM Sizes
1 GB, 2GB
Memory Voltage
1.5V only
On-Board Devices
Chipset
Intel ICH9R
Dual Intel 82574L G-bit ethernet controller
SATA
Intel ICH9R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows Only)
Network Controllers
2x Intel 82574L Gigabit Ethernet
Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
Graphics
Onboard Intel GMA3150 video
Super I/O
Winbond 83627DHG chip
Input / Output
Serial ATA
6 Serial ATA ports ( 3Gbps )
LAN
2x RJ45 LAN port
USB
8x USB 2.0 / 1.1 compatible
2 rear + 5 via headers + 1 Type A connector
VGA
D-Sub 15
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Ports
1x Fast UART 16550 serial port
1x Serial Header
|
System BIOS
BIOS Type
8Mb Flash EEPROM with AMI BIOS
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0 / 3.0
USB Keyboard support
SMBIOS 2.3
Expansion Slots
PCI-Express
1 (x4) PCI-Express (in x16 slot)
Management
Software
SuperDoctor® III
Watch Dog
Power Configurations
ACPI/APM Power Management
Main Switch Override Mechanism
Suspend to RAM (STR)
Power-on mode control for AC power recovery
Internal / External modem remote ring-on
PC Health Monitoring
Voltage
Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, VBAT, Memory, Chipset
CPU Core 1-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
FAN
Total of two 4-pin fan headers
2 x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on / off control
Support 3-pin fans (without speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan conn.
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 2 x Fan Connectors
I2C temperature sensing logic
Thermal Monitor 2 (TM2) Support
LED
CPU / System Overheat LED
Other Features
Chassis intrusion Detection
Chassis intrusion Header
SDDC Support
Operating Environment
Environmental Spec.
Operating Temperature: 0°to 55°C
Non-operating Temperature: -40°to 70°C
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
Regulatory
FCC
Class B
|
