Physical Stats
Form Factor
Mini-ITX
Dimensions
6.7" x 6.7" (17.02cm x 17.02cm)
Processor/Cache
CPU
Intel® Atom™ D525 processor
System Bus
DMI
System Memory
Memory Capacity
Two 200-pin SO-DIMM sockets
Supports up to 4 GB of unbuffered, non-ECC DDR3 800MHz SO-DIMM (Single Channel)
Some 1066MHz and 1333MHz memory can be used, but willoperate at 800MHz
Memory Type
DDR3 800MHz unbuffered, non-ECC SO-DIMM
DIMM Sizes
1 GB, 2GB
Memory Voltage
1.5V only
On-Board Devices
Chipset
Intel ICH9R
Dual Intel 82574L G-bit ethernet controller
SATA
Intel ICH9R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows Only)
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Winbond® WPCM450 BMC
Network Controllers
2x Intel 82574L Gigabit Ethernet
Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
Graphics
Onboard Intel GMA3150 video
Super I/O
Winbond 83627DHG chip
Input / Output
Serial ATA
6 Serial ATA ports ( 3Gbps )
LAN
2x RJ45 LAN port
USB
8x USB 2.0 / 1.1 compatible
2 rear + 5 via headers + 1 Type A connector
VGA
D-Sub 15
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Ports
1x Fast UART 16550 serial port
1x Serial Header
|
System BIOS
BIOS Type
8Mb Flash EEPROM with AMI BIOS
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0 / 3.0
USB Keyboard support
SMBIOS 2.3
Expansion Slots
PCI-Express
1 (x4) PCI-Express (in x16 slot)
Management
Software
IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
SuperDoctor® III
Watch Dog
Power Configurations
ACPI/APM Power Management
Main Switch Override Mechanism
Suspend to RAM (STR)
Power-on mode control for AC power recovery
Internal / External modem remote ring-on
PC Health Monitoring
Voltage
Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, VBAT, Memory, Chipset
CPU Core 1-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
FAN
Total of two 4-pin fan headers
2 x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on / off control
Support 3-pin fans (without speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan conn.
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 2 x Fan Connectors
I2C temperature sensing logic
Thermal Monitor 2 (TM2) Support
LED
CPU / System Overheat LED
Other Features
Chassis intrusion Detection
Chassis intrusion Header
SDDC Support
Operating Environment
Environmental Spec.
Operating Temperature: 0°to 55°C
Non-operating Temperature: -40°to 70°C
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
Regulatory
FCC
Class B
|
