Advanced Search
MBD-X8DTL-3
See larger image

Form Factor M/B

MBD-X8DTL-3

Reference -oicp-mbd-x8dtl-3
Rating:0 opinion
399.00€ Exclu. VAT
Quantity : 
+
-
Warranty  Warranty 1 year

ATX Motherboard Dual 1366-pin LGA Sockets for Intel® Q64-bit Xeon processors 5500/5600 series
up-to 96GB DDR3 ECC
2 Gbe LAN
6 SATA-II, 8 SAS/SATA ports
5 USB 2.0, VGA

Ask an estimate

MBD-X8DTL-3
Notice

Features


1. Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
2. Intel® 5500 (Tylersburg) Chipset
3. Up to 96GB** DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 24GB Unbuffered DIMM
4. Dual Intel® 82574L Gigabit  Ethernet Controller
5. Broadcom 1068E 8-Port SAS Controller; RAID 0, 1, 10; RAID 5 optional
6. 6x SATA2 (3 Gbps) Ports via ICH10R Controller
7. 2 (x8) PCI-E 2.0 (1 in x16 slot),
    1 (x4) PCI-E 2.0 (in x8 slot),
    1 (x4) PCI-E (in x8 slot),
    2x PCI 33MHz slots
8. Integrated Matrox G200eW Graphics
 

Product description


Physical Stats
Form Factor
ATX
Dimensions
12" x 10" (30.5cm x 25.4cm)
 
Processor/Cache
CPU
Dual 1366-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
Intel® Xeon®Processor 5600 Series (Westmere)
Intel® Xeon®Processor 5500 Series (Nehalem-EP)
 
QPI
up to 6.4 GT/s
 
System Memory
Memory Capacity
6x 240-pin DIMM slots
Supports up to 96 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
Memory Mirroring supported
 
Memory Type
1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated
DIMMs
 
DIMM Sizes
1GB, 2GB, 4GB , 8GB** , 16GB**
 
Memory Voltage
1.5 V / 1.35 V
 
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
Intel® 5500 (Tylersburg) chipset
ICH10R + IOH-24D
 
SAS
Broadcom SAS1068E
RAID 0, 1, 10 support
(Optional: AOC-IButton68) RAID 5 support
 
SATA
Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
 
Network Controllers
2x Intel® 82574L Gigabit Ethernet Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
 
Graphics
Matrox G200eW
 
Super I/O
Winbond® 83627DHG-P chip
 
Input / Output
SAS
8 SAS / SATA ports
 
Serial ATA
Six Serial ATA ports
Six SATA hard drives supported
 
LAN
2x RJ45 LAN ports
 
USB
2x USB rear ports
1x USB on-board
2x USB internal headers
Total 5 USB 2.0 Compliant
 
VGA
1x VGA Port
 
Keyboard / Mouse
PS/2 keyboard and mouse ports
 
Serial Port / Header
1 Fast UART 16550 serial port
1 Fast UART 16550 serial header (Option)
 
Chassis ( Optimized for X8DTL-3 )

1U Chassis

2U Chassis 3U Chassis

Tower / 4U

Rackmount

CSE-512F-600B
CSE-811L-600B
CSE-811TQ-600B
CSE-825TQ-560LPB
CSE-826A-R1200LPB
CSE-826E1-R800LPB
CSE-826E2-R800LP
CSE-826TQ-R800LPB
CSE-833T-550B
CSE-833T-650B
CSE-833T-R760B
CSE-835TQ-R800B
CSE-835TQ-R920B
CSE-836A-R1200B
CSE-836E1-R800B
CSE-836E2-R800B
CSE-836TQ-R800B
CSE-933E1-R760B
CSE-933E2-R760B
CSE-933T-R760B
CSE-936A-R1200B
CSE-936A-R900B
CSE-936E1-R900
CSE-745TQ-920B

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

 

 

Important Chassis Notes

To support the new generation Intel® Xeon® processor-based motherboards,

a Revision K chassis is recommended for most models. 
 
Expansion Slots
PCI-Express
2 (x8) PCI-E 2.0 (1 in x16 slot)
1 (x4) PCI-E 2.0 (in x8 slot)
1 (x4) PCI-E (in x8 slot)
PCI
2x 33MHz PCI slots
 
System BIOS
BIOS Type
32Mb SPI Flash EEPROM with AMI® BIOS
 
BIOS Features
Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support
 
Management
Software
IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
SuperDoctor® III
Power Configurations
ACPI / ACPM Power Management
 
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT,
Memory, Chipset Voltages.
4-Phase-switching voltage regulator
 
FAN
Total of six fan headers supporting up to 6 fans
Six 4-pin fan headers
6x fans with tachometer status monitoring
Support 3-pin fans (w/o speed control)
Low noise fan speed control (4-pin fan only)
 
Temperature
Monitoring for CPU and chassis environment
Thermal Control for 6x fan connectors
PECI
 
Other Features
Chassis intrusion detection
Chassis intrusion header
 
Operating Environment
Environmental Spec.
Operating Temperature: 10° to 35° C (50° to 95°F)
Non-operating Temperature: -40° to 70° C (-40° to 158° F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
 

 

Back to top
MBD-X8DTL-3
Notice

Reviews about this MBD-X8DTL-3 (0 reviews)

There is no review for this item, add the first one.
[Add your review]
Back to top