Image de diaporama
Advanced Search


Reference -oicp-mbd-x8dtu-6f+
Rating:0 opinion
979.00€ Exclu. VAT
Quantity : 
Warranty  Warranty 1 year

Proprietary Motherboard Dual Socket (LGA 1366) for Intel® Xeon® 5600/5500 series processors, up to 288GB ECC DDR3, 2 Gbe LAN, 8x6Gb/s SAS/SATA, 6 SATA2, IPMI/ RJ45 LAN dedicated , 6 USB 2.0

Ask an estimate



1. Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
2. Intel® 5520 (Tylersburg) Chipset
3. Up to 288GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM /48GB Unbuffered DIMM
4. Intel® 82576 Dual-Port Gigabit Ethernet Controller
5. Broadcom 2108 8-Port 6Gb/s SAS Hardware RAID Controller;  RAID 0, 1, 5, 6, 10, 50, 60
6. 6x SATA2 (3 Gbps) Ports via ICH10R Controller
7. Left Side 
     1 (x16) PCI-E 2.0 by riser card
    Right Side 
     1 (x4) PCI-E 2.0 by riser card (in x16 slot)
    For 2U configuration, Please go to
    UIO Riser Cards page
8. Integrated Matrox G200eW Graphics
9. Integrated IPMI 2.0 with Dedicated LAN

Product description

Physical Stats
Form Factor
12.8" x 16.5" (32.5cm x 41.9cm)
Dual 1366-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
Intel® Xeon®Processor 5600 Series (Westmere)
Intel® Xeon®Processor 5500 Series (Nehalem-EP)
up to 6.4 GT/s
System Memory
Memory Capacity
18x 240-pin DIMM slots
Supports up to 288GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Supports up to 48GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
Memory Mirroring supported
Memory Type
1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs


DIMM Sizes
1GB, 2GB, 4GB , 8GB , 16GB


Memory Voltage
1.5 V / 1.35V


Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
Note: This board does not support LRDIMM memory.
On-Board Devices
Intel® 5520 (Tylersburg) chipset
ICH10R + IOH-36D


Broadcom 2108 SAS (6Gb/s) w/ Hardware RAID support; supports up to 16 devices
RAID 0, 1, 5, 6, 10, 50, 60 support
BBU (battery backup) extension kit (optional)
Onboard 512MB cache


Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)


Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Winbond® WPCM450 BMC


Network Controllers
Intel® 82576 Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT 3 support for fast, scaleable, and reliable networking
VMDq support for better performance of virtualization
1x Realtek RTL8201N PHY (dedicated IPMI)


Matrox G200eW


Super I/O
Winbond 83827HF chip
Input / Output
8x 6Gb/s SAS / SATA ports with 2 I-PASS connectors
Serial ATA
Six Serial ATA ports
Six SATA hard drives supported
2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port
2x USB rear ports
1x USB on-board
3x USB internal headers
Total 6 USB 2.0 Compliant
1x VGA Port
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Port / Header
1 Fast UART 16550 serial port
1 Fast UART 16550 serial header
Chassis ( Optimized for X8DTU-6F+ )
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards,
a Revision K chassis is recommended for most models.
Expansion Slots
PCI-Express / PCI-X / UIO
Left Side
1 (x16) PCI-E 2.0 by riser card
Right Side
1 (x4) PCI-E 2.0 by riser card
For 2U configuration, Please go to UIO Riser Cards page
System BIOS
32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support
IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
SuperDoctor® III
Power Configurations
ACPI / ACPM Power Management
PC Health Monitoring
Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby,
VBAT, Memory, Chipset Voltages.
6-Phase-switching voltage regulator
Total of eight fan headers supporting up to 8 fans
Eight 4-pin fan headers
8x fans with tachometer status monitoring
Support 3-pin fans (w/o speed control)
Low noise fan speed control (4-pin fan only)
Monitoring for CPU and chassis environment
Thermal Control for 8x fan connectors
Other Features
Chassis intrusion detection
Chassis intrusion header
Operating Environment
Environmental Spec.
Operating Temperature: 10° to 35° C (50° to 95°F)
Non-operating Temperature: -40° to 70° C (-40° to 158° F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)


Back to top

Reviews about this MBD-X8DTU-6F+ (0 reviews)

There is no review for this item, add the first one.
[Add your review]
Back to top