Image de diaporama
Advanced Search

MBD-X8DTU-F

Reference -oicp-mbd-x8dtu-f
Rating:0 opinion
419.00€ Exclu. VAT
Quantity : 
+
-
Warranty  Warranty 1 year

Proprietary Motherboard Dual Socket (LGA 1366) for Intel® Xeon® 5600/5500 series processors
up to 192GB ECC DDR3
2 Gbe LAN, 6 SATA2, 8 USB 2.0, VGA
Integrated IPMI

Ask an estimate

MBD-X8DTU-F
Notice

Features


1. Intel® Xeon® processor 5600/5500  series, with QPI up to 6.4 GT/s
2. Intel® 5520 (Tylersburg) Chipset
3. Up to 192GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 48GB Unbuffered DIMM
4. Intel® 82576 Dual-Port Gigabit Ethernet Controller
5. 6x SATA2 (3 Gbps) Ports via ICH10R Controller
6. Left Side 
     1 (x16) PCI-E 2.0 + 1 UIO or
     1 (x16) PCI-E 2.0
    Right Side 
     2 LAN optional
    For 2U configuration, Please go to UIO Riser Cards page
7. Integrated Matrox G200eW Graphics
​8. Integrated IPMI 2.0 with Dedicated LAN
 

Product description


Physical Stats
Proprietary
Dimensions
12.075" x 13.05" (30.67cm x 33.15cm)
 
Processor/Cache
CPU
Dual 1366-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
Intel®Xeon®Processor 5600 Series (Westmere)
Intel®Xeon®Processor 5500 Series (Nehalem-EP)*
QPI
up to 6.4 GT/s
 
System Memory
Memory Capacity
12x 240-pin DIMM slots
Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
Memory Mirroring supported
 
Memory Type
1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
1GB, 2GB, 4GB , 8GB , 16GB
 
Memory Voltage
1.5 V / 1.35V
 
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
Intel® 5520 (Tylersburg) chipset
ICH10R + IOH-36D
 
SATA
Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
 
IPMI
Support for Intelligent Platform Management Interface v2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Winbond® WPCM450 BMC
 
Network Controllers
Intel® 82576 Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT 3 support for fast, scaleable, and reliable networking
VMDq support for better performance of virtualization
 
Graphics
Matrox G200eW
 
Super I/O
Winbond 83827HF chip
 
Input / Output
Serial ATA
Six Serial ATA ports
Six SATA hard drives supported
 
LAN
2x RJ45 LAN ports
1x RJ45 Dedicated IPMI  LAN port
 
USB
2x USB rear ports
2x USB on-board
4x USB internal headers
Total 8 USB 2.0 Compliant
 
VGA
1x VGA Port
 
Keyboard / Mouse
PS/2 keyboard and mouse ports
 
Serial Port / Header
1 Fast UART 16550 serial port
1 Fast UART 16550 serial header (Option)
 
Chassis ( Optimized for X8DTU )
 
1U Chassis
CSE-812L-600UB
2U Chassis
CSE-826A-R1200UB
CSE-826E16-R1200UB
CSE-826E26-R1200UB
Tower / 4U Rackmount
CSE-847E1-R1400UB
CSE-847E2-R1400UB
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards, a Revision 
K chassis is recommended for most models. 
 
Expansion Slots
PCI-Express / PCI-X / UIO
Left Side
1 (x16) PCI-E 2.0 + 1 UIO slots or
1 (x16) PCI-E 2.0
Right Side
2 LAN optional
For 2U configuration, Please go to UIO Riser Cards page
 
System BIOS
BIOS Type
32Mb SPI Flash EEPROM with AMI® BIOS
 
BIOS Features
Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support
 
Management
Software
IPMI (Intelligent Platform Management Interface) v1.5/2.0 with KVM support
SuperDoctor® III
 
Power Configurations
ACPI / ACPM Power Management
 
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, 
VBAT, Memory, Chipset Voltages.
6-Phase-switching voltage regulator
 
FAN
Total of eight fan headers supporting up to 8 fans
Eight 4-pin fan headers
8x fans with tachometer status monitoring
Support 3-pin fans (w/o speed control)
Low noise fan speed control (4-pin fan only)
 
Temperature
Monitoring for CPU and chassis environment
Thermal Control for 8x fan connectors
PECI
 
Other Features
Chassis intrusion detection
Chassis intrusion header
 
Operating Environment
Environmental Spec.
Operating Temperature: 10° to 35° C (50° to 95°F)
Non-operating Temperature: -40° to 70° C (-40° to 158° F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)

 

Back to top
MBD-X8DTU-F
Notice

Reviews about this MBD-X8DTU-F (0 reviews)

There is no review for this item, add the first one.
[Add your review]
Back to top