Advanced Search

MBD-X9DAL-i

Reference -oicp-mbd-x9dal-i
Rating:0 opinion
369.00 € Exclu. VAT
Quantity : 
+
-
Warranty  Warranty 1 year

ATX Motherboard Intel Xeon (LGA 1356)
Max 384GB DDR3 1600MHz
2 Gbe LAN
1x PCI 32; 1 PCI-e x16; 1 PCI-e 3.0 x4 (in x8); 3 PCI-e 3.0 x8
8 SATA 2 & 2 SATA 3
4 USB 3.0 & 10 USB 2.0

Ask an estimate

MBD-X9DAL-i
Notice

Features


1. Dual socket B2 (LGA 1356) supports Intel® Xeon® processor E5-2400 v2
2. Intel® C602 chipset
3. Up to 384GB DDR3 1600MHz LRDIMM / 192GB RDIMM; 6x DIMM slots
4. Expansion slots: 1 PCI 32,1 PCI-E 3.0 x16, 1 PCI-E 3.0 x4 (in x8), 3 PCI-E 3.0 x8 (1 allows a x16 card)
5. Intel® 82574L Dual port GbE LAN
6. 8x SATA2 and 2x SATA3 ports
7. 4x USB 3.0 and 10x USB 2.0 ports

Product description


Physical Stats
Form Factor ATX
Dimensions 12" x 10 ", (30.48cm x 25.4 cm)
 
Processor/Cache
CPU
Intel® Xeon® processor E5-2400   and E5-2400 v2 (up to 95W TDP **)
Dual Socket B2 (LGA 1356)
 
Cache
Up to 25MB
System Bus
QPI up to 8 GT/s
** Motherboard supports this maximum TDP. Please verify your system can thermally support
 
System Memory
Memory Capacity
6x 240-pin DDR3 DIMM slots
Up to 384GB DDR3 ECC LRDIMM
Up to 192GB DDR3 ECC Registered memory (RDIMM)
Up to 48GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM)
 
Memory Type
1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs
 
* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
 
DIMM Sizes
32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
64GB LRDIMM
 
Memory Voltage
1.5 V, 1.35 V
 
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
Intel® C602 chipset
 
AHCI SATA
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10
 
SCU SATA
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
 
Network Controllers
Intel® 82574L Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
 
Audio
RealTek ALC889 7.1 High Definition Audio with S/PDIF header
 
Input / Output
AHCI SATA
2x SATA 3.0 ports (6Gbps)
4x SATA 2.0 ports (3Gbps)
 
SCU SATA
4x SATA 2.0 ports (3Gbps)
 
LAN
2 RJ45 Gigabit Ethernet LAN ports
 
USB
4 USB 3.0 ports (Renesas uPD720200A; 2 rear + 2 via header)
10 USB 2.0 ports
  (4 rear + 6 via header)
 
Audio
7.1 HD Audio with optical S/PDIF
 
Keyboard/Mouse
PS/2 Keyboard Combo port
 
Serial Port / Header
2 Fast UART 16550 ports / 1 rear and 1 header
 
DOM
1 DOM (Disk on Module) power connector
 
TPM
1 TPM Header
 
Chassis (Optimized for X9DAL-i )
2U Chassis
CSE-213LT-600LPB
CSE-825TQ-600LPB
Mid-Tower
CSE-732D4-500B
Tower / 4U Rackmount
CSE-743T-665B
CSE-743TQ-865B-SQ
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
 
SuperServer(s) with X9DAL-i
 
Model(s)
SYS-7037A-iL
 
Expansion Slots
PCI-Express
1x PCI-E 3.0 x16
3x PCI-E 3.0 x8 (1 allows a x16 card)
1x PCI-E 3.0 x4 (in x8)
1x PCI-32
 
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. 
See manual block diagram for details.)
 
System BIOS
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
 
BIOS Features
Plug and Play (PnP)
APM 1.2
DMI 2.3
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1
 
Management
Software
SuperDoctor® III
Watch Dog
NMI
 
Power Configurations
ACPI / APM Power Management
Main Switch Override Mechanism
CPU Fan auto-off in sleep mode
Power-on mode for AC power recovery
Suspend to RAM (STR)
 
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, 
+5V Standby, VBAT, Memory Voltages.
5+1 Phase-switching voltage regulator
 
FAN
6x 4-pin fan headers (up to 6 fans)
6x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
 
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 6x Fan Connectors
I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
 
LED
CPU / System Overheat LED
 
Other Features
Chassis intrusion detection
Chassis intrusion header
SDDC Support
RoHS
 
 
Operating Environment
Operating Temperature Range
10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
5% - 95% (non-condensing)

 

 

Back to top
MBD-X9DAL-i
Notice

Reviews about this MBD-X9DAL-i (0 reviews)

pixel_trans
There is no review for this item, add the first one.
pixel_trans
pixel_trans
[Add your review]
Back to top