Advanced Search

MBD-X9DRW-iF

Reference -oicp-mbd-x9drw-if
Rating:0 opinion
589.00€ Exclu. VAT
Quantity : 
+
-
Warranty  Warranty 1 year

Proprietary Motherboard Dual Socket R (LGA 2011) for Intel® Xeon® E5-2600 and E5-2600 v2 processors,
up to 1TB ECC DDR3
2 Gbe LAN, IPMI
8 SATA2 et 2 SATA
6 USB 2.0

Add to cart
Ask an estimate

MBD-X9DRW-iF
Notice

Features


1. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and E5-2600 v2 family†
2. Intel® C602 chipset; QPI up to 8.0GT/s
3. Up to 1TB ECC DDR3, up to 1866MHz; 16x DIMM slots
4. Riser card support:
    Left side - 1 (x32) PCI-E 3.0
    Right side - 1 (x16) PCI-E 3.0
5. Intel® i350 Dual port GbE LAN
6. 8x SATA2 and 2x SATA3 ports
7. Integrated IPMI 2.0 and KVM with Dedicated LAN
8. 6x USB 2.0 ports (4 rear + 2 via header)
 
 

Product description


Physical Stats
Form Factor
Proprietary WIO
Dimensions
12" x 13" (30.5cm x 33.0cm)
 
Processor/Cache
CPU
Dual Socket R (LGA 2011)
Intel® Xeon® processor E5-2600
    and E5-2600 v2 family†
    (up to 135W TDP **)
Note † BIOS version 3.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
 
Cache
Up to 30MB
 
System Bus
QPI up to 8 GT/s
 
System Memory
Memory Capacity
16x 240-pin DDR3 DIMM slots
Up to 1TB DDR3 ECC LRDIMM
Up to 512GB DDR3 ECC RDIMM
Up to 128GB DDR3 ECC/non-ECC UDIMM
 
Memory Type
1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs
 
* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
 
DIMM Sizes
32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM
 
Memory Voltage
1.5 V, 1.35 V
 
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
Intel® C602 chipset
 
AHCI SATA
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10
 
SCU SATA
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
 
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Renesas SH7757 BMC
 
Network Controllers
Intel® i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8211E PHY (dedicated IPMI)
 
Video
G200 (Renesas SH7757 BMC)
 
Input / Output
AHCI SATA
2x SATA 3.0 ports (6Gbps)
4x SATA 2.0 ports (3Gbps)
 
SCU SATA
4x SATA 2.0 ports (3Gbps)
 
LAN
2 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
 
USB
6 USB 2.0 ports total
(4x rear + 2x via header)
 
Video
1 VGA port
 
Serial Port / Header
2 Fast UART 16550 ports / 1 rear and 1 header
 
DOM
1 DOM (Disk on Module) power connector
 
Chassis (Optimized for X9DRW-iF )
1U Chassis
CSE-113TQ-600WB
CSE-113TQ-R700WB
CSE-116TQ-R700WB
CSE-815TQ-600WB
CSE-815TQ-R700WB
2U Chassis
CSE-213A-R740WB
CSE-825TQ-R740WB
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards,
Revision M chassis is recommended. 
 
SuperServer(s) with X9DRW-iF
Model(s)
SYS-1027R-WRF
SYS-2027R-WRF
SYS-6017R-WRF
SYS-6027R-WRF
SYS-6017R-NTF
 
Expansion Slots
PCI-Express
Riser card support:
Left side - 1 PCI-E 3.0 (x32)
Right side - 1 PCI-E 3.0 (x16)
 
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers.
See manual block diagram for details.)
 
System BIOS
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
 
BIOS Features
Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
BIOS rescue hot keys
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1
 
Management
Software
SuperDoctor® III
Watch Dog
NMI
IPMI 1.5 / 2.0
 
Power Configurations
ACPI / APM Power Management
Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby,
+5V Standby, VBAT, 4 Memory Voltages.
5+1 Phase-switching voltage regulator
 
FAN
6x 4-pin fan headers
6x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
 
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 6x Fan Connectors
Thermal Monitor 2 (TM2) support
PECI
 
LED
CPU / System Overheat LED indicator
Suspend static indicator LED
UID/Remote UID
 
Other Features
Chassis intrusion detection
Chassis intrusion header
SDDC Support
RoHS
Dual cooling zones
 
Operating Environment
Operating Temperature Range
10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
5% - 95% (non-condensing)

 

Back to top
MBD-X9DRW-iF
Notice

Reviews about this MBD-X9DRW-iF (0 reviews)

There is no review for this item, add the first one.
[Add your review]
Back to top