Advanced Search
PEAK-870VL2
See larger image

Brands

Form Factor M/B

PEAK-870VL2

Reference -oicp-peak870vl2
Rating:0 opinion
849.00€ Exclu. VAT
Quantity : 
+
-
Warranty  Warranty 1 year

PICMG 1.3 Full-Size SHB, Intel® 945G Chipset, LGA775 Celeron®/Pentium® 4/Core™ 2 Duo 533/800/1066MHz FSB,
32bit/33MHz PCI, DDR2 x 2
VGA,
2 Gbe Lan Intel®
4 SATa, 2 COM

Add to cart
Ask an estimate

PEAK-870VL2
Notice

Features


- Intel® LGA775 Core™ 2 Duo/Pentium® 4/Pentium® D/Celeron® D Processors with 533/800/1066 MHz
- Supports Dual Channel Non-ECC DDR2 533/667 MHz up to 4GB
- 2 x 82573L PCI Express Gigabit Ethernet LAN
- 4 x SATA, 8 x USB 2.0, 2 x COM , 1 x Parallel , 1 x Floppy
- Intel® 945G GMCH Integrated Intel® GMA 950, Max 128 MB of DVMT for Graphics Memory Allocation
- Analog Display Supports up to 2048 x 1536 at 75 Hz for CRT

 

Product Description


CPU Support
- Support Intel® LGA775 Core™ 2 Duo/Pentium® 4/Pentium® D/ Celeron® D processors
- Intel® Embedded Processor List ( Intel® Longevity CPU):
Intel® Core™ 2 Duo Processor E6400 & E4300 & E2160
Intel® Pentium® 4 Processor 651 & 551 & 531
Intel® Celeron® D Processor 352 & 341
Intel® Celeron® Processor 440
- 533/800/1066 MHz FSB support


Main Memory
- 2 x 240-pin DIMM, for up to 4GB dual channel Non-ECC DDR2 533/667 SDRAM
* Note: Maximum 4GB. Actual memorey size is dynamic based on the OS I/O resource allocation


Chipset
- Intel® 945G +ICH7R (PEAK 870VL2)


BIOS
- Award System BIOS
- Plug & Play support
- Advanced Power Management and Advanced Configuration & Power Interface support


On-board LAN
- 2 x Intel® 82573L PCIe Gigabit Ethernet Controllers
- Supports Boot from LAN


Display
- Intel® 945G GMCH Integrated Intel® GMA 950, Max 128 MB of DVMT for graphics memory allocation
- Analog display support up to 2048 x 1536 @ 75 Hz for CRT


Audio
- AC'97 Audio Codec, Realtek ALC655
- 3 x (1x4 pin header) for Line-in/Line-out/Mic-in

 

Watchdog Timer
- 1-minute increments from 1 to 255 minutes
- 1-second increments from 1 to 255 seconds
- On-chip RTC with battery backup
- 1 x External Li-lon battery


I/O Interface
- USB 2.0: 8 ports (4 on board, 4 to backplane)
- Serial port: 2 port, with 2x5pin headers (COM 2 support RS232/RS422/RS485)
- IDE: 1 x 40-pin connector. Support Ultra ATA 100/66/33
- Disk on Module: 1 x 2-pin power connector for DOM
- SATA HDD: 4 ports,Support RAID 0.1
- Parallel port: 1 x 26-pin connector
- Floppy: 1 x 34-pin connector
- GPIO: Supports 4 sets general purpose I/O each with TTL level (5 V) interface
- On-board buzzer/2-pin power on button switch
- SMBus 2.0 to backplane
- On-board 2-pin header for reset/4-pin for PC speaker
- 5-pin for key lock/power LED/HDD Active LED
- 1 x 4-pin fan connector (for CPU); 2 x 3-pin fan connectors (for System)
- 1 x 5-pin JST connector for chassis or backplane front Keyboard/Mouse
- I/O On SBC Bracket
1 x VGA DB-15 connector
2 x RJ45 Gigabit Ethernet LAN port
1 x PS/2 Keyboard/Mouse


System Monitor
- 8 voltages (For +1.5V, +1.8V, +3.3V, +3.3VSB, +5V, +12V, Vcore and +5Vsb)
- 2 temperature
- 3 fan speed monitors


Dimensions
- PICMG 1.3 SHB
338.58mm (L) x 126.39mm (W) (13.3" x 4.9")


Power Input
- Power source from backplane through golden finger
- Supports both ATX or BTX power supplies
- 4-pin +12 V power input connector

 


CPU: 2 x Core™ 2 Duo (E6700) 2.66G
Memory: 2 x DDR2 533MHz 1GB +12V +5V +3.3V +5Vsb
Full-Loading Mode 4.43 A 3.42 A 0.63 A 0.03 A
Light-Loading Mode 2.48 A 3.12 A 0.65 A 0.03 A
* Note:
1. Full Loading: Utilize CPU 100% with Burn-in test running
2. Light Loading: Utilize CPU loading below 5% without data or application running.


Environment
- Board level operating temperature: 0°C to 60°C
- Storage temperature: -20°C to 80°C
- Relative humidity: 10% to 90% (Non-condensing)


Certifications
- CE approval
- FCC Class A

 

 

 

Back to top
PEAK-870VL2
Notice

Reviews about this PEAK-870VL2 (0 reviews)

There is no review for this item, add the first one.
[Add your review]
Back to top