Image de diaporama
Que recherchez-vous ?

IPC-P2108SI

Référence - oicp-IPC-P2108SI
Note moyenne : 0 avis
590.00€ HT
Quantité 
+
-
Garantie :   Garantie : 1 an

8 ports RS-422 / 485 Universal PCI
With Surge & Isolation

Demander un devis

IPC-P2108SI
Notes et avis

Fonctionnalités


  •  Expands 8 independent RS-422/485 serial ports with communication speeds up to 921.6Kbps
  •  High reliability SUN1999 16C950 compatible UART controller on-board.
  • Compliance with PCI 33MHz Ver 3.0, 2.3, 2.2 & 2.1 specifications
  •  Supports both 64-bit & 32-bit PCI bus slot and 3.3V & 5V power
  •  RS-422/485 auto detect and switching technology – jumper and software free
  •  AHDC/CS™ technology for collision free communication
  •  2.5 KV Isolation Protection for all signal and power
  •  Circuit Damage Protection of 500W Peak Per IEC 61000-4-5
  •  Ultra low power consumption design for Green Environment.
  •  Built-in ±15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
  •  Plug-n-Play, I/O address and IRQ assigned by BIOS
  •  Certified by CE, FCC, RoHS, and Microsoft WHQL approval
  •  Support Microsoft Windows, Linux, and DOS

 

Spécifications


Interface RS-422/485 Baud rate 50bps ~921.6Kbps
Controller SUNIX SUN1999 (16C950 UART
Compatible) Stop bit 1, 1.5, 2
BUS Universal PCI 64/32bit 3.3V/5V PCI Ver 3.0, 2.3, 2.2, 2.1 Parity even, odd, none, mark, space No. of Port 8-port Flow Control Xon/Xoff (software) IRQ & IO Assigned by System FIFO 128byte Hardware Signal RS-422: TxD+, TxD-, RxD+, RxD-, GND, RI 4-wire RS-485: TxD+, TxD-, RxD+, RxD-, GND 2-wire RS-485: Data+, Data-, GND ESD Protection ±15KV ESD protection for each signal Human Body Model (HBM) ±15KV IEC1000-4-2 Air Gap Discharge ±8KV IEC1000-4-2 Contact Discharge Surge Protection 500W peak surge protection for all signal lines meet IEC 61000-4-5 Isolation 2.5 KV Isolation Protection for all signal and power PCB Connector DB62 Female
Windows Client Windows XP/Vista/7/8/8.1 (X86/X64)
Windows Server Windows 2000 / 2003 / 2008 / 2008 R2 / 2012 / 2012 R2 (X86/X64)
Windows Embedded Windows CE 4.2/5.0/6.0/XP Embedded/POSReady 2009/POSReady 7/ Embedded System 2009/
Embedded Standard 7 Linux Linux 2.4.x/2.6.x/3.x DOS DOS Hardware EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, FCC Part 15 Class B, BSMI: CNS13438, C-Tick: CISPR22 AS/NZS,
RoHS Software Microsoft WHQL Windows ◆
Microsoft Client: XP/Vista/7/8/8.1 (X86/X64) ◆
Microsoft Server: 2000 / 2003 / 2008 / 2008 R2 / 2012 / 2012 R2 (X86/X64)
Operation Temperature 0 to 70°C (32 to 158°F)
Operation Humidity 5 to 95% RH Storage
Temperature -20 to 85°C (-4 to 185°F) PCB
Dimension 120 x 107 mm Bracket Standard 121 mm Bracket Space 1 
Retour en haut
IPC-P2108SI
Notes et avis

Avis des internautes sur IPC-P2108SI (0 avis)

Il n'y a actuellement aucun avis pour cet article, soyez le premier à donner le votre.
[Ajouter votre commentaire]
Retour en haut