Que recherchez-vous ?
» » » Kit ROBO-679 - Pentium III 1GHz - 512MB SDRAM

Kit ROBO-679 - Pentium III 1GHz - 512MB SDRAM

Référence - oicp-kitrobo679-P3-1GHz
Note moyenne : 0 avis
599.00 € HT
Quantité 
+
-
Garantie :   Garantie : 1 an

KIT ROBO-679, M/B au format PICMG 1.0 VGA/LAN
CPU: Pentium III 1GHz
Memoire: 512MB SDRAM

Demander un devis

Kit ROBO-679 - Pentium III 1GHz - 512MB SDRAM
Notes et avis

Fonctionnalités


1- Reliable design for high speed FC-PGA2 Intel Pentium III or Celeron processor

2- Intel 815E chipset, backed by Intel EID's long product life support

3- PC 100/133MHz-SDRAM for cost effrective memory support

4- 4MB external display memory enable optimum system memory utilization for maximum 2D/3D graphics performance through Direct AGP

5-  On-board Intel 10 BASE-T/100BASE-TX Fast Ethernet for high speed data transfers

6- Standard features for embedded system, like H/W monitoring, WDT, SSD and Wake-On-LAN

7- Proprietary PCI connector for expansion (optional Daughter board provided, such as Ultra 160 SCSI or Fast Ethernet)

8- One DOC socket for booting Windows NT directly

Description du produit


GENERAL

Processor
CPU & Package: Intel® Pentium® 3 or Celeron® processor in the FC-PGA2 370 package
FSB: 133/100/66MHz

Pentium III 1GHz installed


Chipset/Core Logic
Intel® 815E and ICH2


System Memory
- Up to 512MB PC 100/133 SDRAM on two 168-pin DIMM sockets

512MB on board


BIOS
Award BIOS

 

Display

- 4MB display memory

- Display resolution up to 1600 x 1200, 256 colors at refresh rate 85Hz

 

Ethernet
- 10BASE-T/100BASE-TX Ethernet
- IEEE 802.3u auto-negotiation support
- One RJ-45 connector

 

Expansion Interface
Proprietary PCI connection interface

 

ISA Bus

64mA  high driving ISA bus interface to backplane  for legacy ISA slots

 

EIDE

Support  four EIDE devices with Ultra DMA 100/66/33


Solid State Disk
DOC socket for up to 288MB

 

I/O

- Up to two floppy disk drives

- Two serial, one parallel, one irDa and three USB ports

- One 6-pin mini-DIN connector for keyboard and mouse
- One 5-pin header for external keyboard connection

 

ACPI Function

- ATX function with 4-pin header connect to backplane

- Modem-Ring-On and Wake-On-LAN

 

Hardware Monitoring
System monitor (fan, temperature, voltage)


Watchdog Timer
Programmable via software from 0.5 sec. to 254.5 min.

Can be enabled/disabled by jumper


Power Requirement
Typical: +5V@10A; +12V@200mA; -12V@30mA


Dimension
Dimension : 338.5(L) x 122(W) mm; 13.33"(L) x 4.8" (W)
PCB: 6-layer


Environment
Operating Temperature: 0 to 50oC
Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 95%, non-condensing


MTBF
108,051 hrs

 

 

DATASHEET

 

 

 

 

Retour en haut
Kit ROBO-679 - Pentium III 1GHz - 512MB SDRAM
Notes et avis

Avis des internautes sur Kit ROBO-679 - Pentium III 1GHz - 512MB SDRAM (0 avis)

pixel_trans
Il n'y a actuellement aucun avis pour cet article, soyez le premier à donner le votre.
pixel_trans
pixel_trans
[Ajouter votre commentaire]
Retour en haut