|
Physical Stats
Form Factor
microATX
Dimensions
9.6" x 9.6" (24.4cm x 24.4cm)
Processor/Cache
CPU
LGA 1156 Socket
Intel® Xeon® X3400 series
Intel® Xeon® L3400 series
Intel® Core™ i3
Intel® Pentium® G6950
Intel® Celeron® G1101
System Memory
Memory Capacity
4x 240-pin DDR3 DIMM slots
Supports up to 32 GB DDR3 ECC Registered memory (RDIMM)
Supports up to 16 GB DDR3 ECC Un-Buffered memory (UDIMM)
1333 / 1066 / 800 MHz
Dual Core processors of Ci3 and Pentium: support ECC UDIMM only
Note: Supports 1-Gb and 2-Gb x8 devices only - Intel 3420 / 3400 Chipset
Memory Requirements
Note
All X3400 series and L3426 CPU support RDIMM and UDIMM
All i3 series, L3406, G6950, and G1101 CPU support UDIMM only
Memory Type
1333 / 1066 / 800 MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit,
240-pin gold-plated DIMMs
DIMM Sizes
1GB, 2GB, 4GB, 8GB
Memory Voltage
1.5 V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
Intel® 3420 chipset
SATA
6x SATA (3 Gbps)
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers
2x Intel® 82574L Gigabit Ethernet Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
VGA
Matrox G200eW 16MB DDR2
Super I/O
Winbond 83627DHG-P
Clock Generator
CK505
Input / Output
Serial ATA
6 SATA ports
6 SATA hard drives supported
LAN
2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port
USB
2x USB rear ports
1x USB on-board
2x USB internal header (4 ports)
Total 7 USB 2.0 Compliant
VGA
1x VGA port
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Port / Header
1x Fast UART 16550 serial port
1x internal header
|
|
Chassis ( Optimized for X8SIL-F )
|
1U Chassis
CSE-111T-560CB
CSE-510-200B
CSE-510L-200B
CSE-510T-200B
CSE-512-200B
CSE-512F-280B
CSE-512F-350B
CSE-512F-520B
CSE-811i-280
CSE-811i-520
CSE-811T-410
CSE-811T-420
CSE-811TQ-280
CSE-811TQ-520B
CSE-813MTQ-280C
CSE-813MTQ-520C
|
2U Chassis
CSE-213A-R900LPB
CSE-216A-R900LPB
CSE-216E1-R900LPB
CSE-216E2-R900LPB
CSE-822T-400LPB
CSE-823MTQ-R700LPB
CSE-823TQ-650LPB
CSE-825MTQ-R700LPB
CSE-825TQ-560LPB
CSE-825TQ-R700LPB
CSE-826A-R1200LPB
CSE-826E1-R800LPB
CSE-826E2-R800LP
CSE-826TQ-R800LPB
|
3U Chassis
CSE-833T-550B
CSE-833T-650B
CSE-833T-R760B
CSE-835TQ-R800B
CSE-836A-R1200B
CSE-836E1-R800B
CSE-836E2-R800B
CSE-836TQ-R800B
CSE-933E1-R760B
CSE-933E2-R760B
CSE-933T-R760B
CSE-936A-R1200B
CSE-936A-R900B
CSE-936E1-R900
|
Mid-Tower
CSE-731D-300B
CSE-731i-300B
CSE-733TQ-465B
CSE-733TQ-645
CSE-733TQ-665B
Tower / 4U Rackmount
CSE-743T-645
CSE-743T-650
CSE-743T-665B
CSE-743T-R760
CSE-743TQ-865B
CSE-743TQ-865B-SQ
CSE-743TQ-R760
CSE-745TQ-800B
CSE-745TQ-R800B
CSE-846A-R1200B
CSE-846E1-R900B
CSE-846E2-R900
CSE-846TQ-R900B
|
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards,
a Revision K chassis is recommended for most models.
Expansion Slots
PCI-Express
2 (x8) PCI-E 2.0 slot
1 (x4) PCI-E (using x8 slot)
PCI
1 32-bit PCI slot
System BIOS
BIOS Type
32Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
Management
Software
IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
SuperDoctor® III
Watch Dog
Power Configurations
ACPI / ACPM Power Management
Main Switch Override Mechanism
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode for AC power recovery
Internal/External modem ring-on
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby,
VBAT, HT, Memory, Chipset Voltages.
3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
Total of 5 fan headers supporting up to 5 fans
Five 4-pin fan headers
5x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED
CPU / System Overheat LED
+5V Standby alert LED
Other Features
Chassis intrusion detection
Chassis intrusion header
Operating Environment
Environmental Spec.
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
