Image de diaporama
Que recherchez-vous ?

Matrox SOL 6M 4A E

Référence - oicp-matrox_sol6m4ae
Note moyenne : 0 avis
1,489.00€ HT
Quantité 
+
-
Garantie :   Garantie : 1 an

Analog PCIe® x4 frame grabber with four independent inputs
64 MB DDR SDRAM
(Aucun accessoires)

Demander un devis

Matrox SOL 6M 4A E
Notes et avis

Fonctionnalités


  • up to four fully independent inputs
  • 10-bit A/D converters
  • sampling rate up to 65 MHz
  • video synchronization and PLL lock detection
  • 64 MB acquisition buffer
  • serial communication ports mapped as PC COM ports
  • programmed using Matrox Imaging
  • Library (MIL) sold separately supports 32-bit Windows® XP,
  • 32/64-bit Windows® 7/8.1/10 and 32/64-bit Linux®

 

Spécifications


Hardware
• PCIe® x1 or x4 card, or PCI/PCI-X® card with universal 64-bit card edge connector (64-bit 33/66 MHz 5V/3.3V PCI and 64-bit 66/100/133 MHz PCI-X®)
• 64MB of 83/100 MHz DDR SDRAM for acquisition
• up to four independent analog video inputs with
- 2:1 mux
- AC coupling
- selectable low pass filter: 7.5 MHz or 33 MHz
- variable gain amplifier and adjustable references
- 10-bit A/D with sampling rate up to 65 MHz
- SNR of 55.6 dB1
- pixel jitter of ±2.3ns2
- video synchronization and PLL lock detection
- 1K x 10-bit LUT
- LVDS/TTL pixel clock, hsync/csync, and vsync inputs or outputs
- TTL trigger input and exposure output
- serial communication port mapped as PC COM port
• inputs can be combined to acquire from
- component RGB source
- two dual-output monochrome video sources
• supports frame and line-scan video sources
• eight TTL/LVDS configurable auxiliary inputs
• eight TTL/LVDS configurable auxiliary outputs
• four opto-isolated configurable auxiliary inputs
• PROM for storing calibration parameters 


Dimensions and environmental information
• 23.4 L x 11.4 H x 1.57 W cm (9.225” x 4.5” x 0.62”) from bottom edge of goldfinger to top edge of board and without bracket and retainer
• power consumption (typical): 1.64A @ 5V or 8.21W, 0.325A @ 12V or 3.90W, or 12.11W total3
• operating temperature: 0°C to 55° C (32° F to 131° F)
• relative humidity: up to 95% (non-condensing)
• FCC class A
• CE class A
• RoHS-compliant 

 

Retour en haut
Matrox SOL 6M 4A E
Notes et avis

Avis des internautes sur Matrox SOL 6M 4A E (0 avis)

Il n'y a actuellement aucun avis pour cet article, soyez le premier à donner le votre.
[Ajouter votre commentaire]
Retour en haut