|
Physical Stats
Micro ATX
Dimensions 9.6" x 9.6 ", (24.4cm x 24.4cm)
Processor/Cache
Single LGA775 Socket
Supports Intel® Core™2 Extreme QX9000/QX6000 series
Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series
Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
Supports Intel® Pentium® E5000/E2000 series
Supports Intel® Celeron® E1000 and 400 series
System Bus
1333 / 1066 / 800 MHz system bus
System Memory
Memory Capacity
Four 240-pin DIMM sockets
Supports up to 8 GB of unbuffered, non-ECC DDR2 800/667MHz memory (Dual Channel)
Memory Type
DDR2 800/667MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs
DIMM Sizes
256 MB, 512 MB, 1 GB, 2 GB
Memory Voltage
1.8V only
On-Board Devices
Chipset
Intel G35
ICH9DO
Serial ATA
Intel® ICH9DO SATA2 (3 Gbps) controller built-in
RAID 0, 1, 5, 10 support (Windows Only)
RAID 0, 1, 10 support (Linux)
Network Controllers
1 x Intel® 82566DM Single Port Gigabit PCI-Express Ethernet
Supports 10 BASE-T, 100 BASE-TX, and 1000 BASE-T with RJ45 output
Audio
Realtek ALC883 High Definition 7.1 Channel Audio
Super I/O
Winbond 83627DHG chip
Clock Generator
CK505
Input / Output
Serial ATA
Four Serial ATA ports (3Gbps)
IDE
One EIDE channel supports up to two UDMA IDE devices
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
LAN
1x RJ45 LAN port
USB
11x USB 2.0/1.1 compliant (6x ports + 2x headers + 1 on-board connectors)
6 rear ports, 5 on-board
Audio
Line-in / Line-out / Microphone Ports
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Ports
2x Fast UART 16550 serial port
2x Serial Header
|
Chassis ( Optimized for C2SBC-Q)
Mid-Tower
CSE-733E-465B
CSE-733i-465B
CSE-733i-645
CSE-733T-465B
CSE-733T-645
CSE-733TQ-465B
Important Note
To ensure system stability, a 420W (minimum) ATX power supply [4-pin +12V
AND (20 or 24-pin)] is required.
Expansion Slots
PCI-Express
1 (x16) PCI-e slot
1 (x4) PCI-e slot (using x8 slot)
PCI
2x 32-bit 33MHz PCI (5V) slots
System BIOS
BIOS Type
16Mb SPI Flash EEPROM with Phoenix BIOS®
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
Management
Software
SuperDoctor® III
Watch Dog
NMI
Power Configurations
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode control for AC power recovery
Internal / External modem remote ring-on
Suspend to RAM (STR)
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT, HT,
Memory, Chipset.
CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
Adjustable CPU clock frequency ratio (Only available if CPU is supported)
FAN
Total of three 4-pin fan headers
3 x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on / off control
Support 3-pin PWM fans (without speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan conn.
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor 2 (TM2) Support
PECI
LED
CPU / System Overheat LED
Standby alert LED
Other Features
Chassis intrusion Detection
Chassis intrusion Header
TPM 1.2
Operating Environment
Environmental Spec.
Operating Temperature: 0°to 55°C (50°to 95°F)
Non-operating Temperature: -40°to 85°C
Operating Relative Humidity: 15% to 95% (non-condensing)
Non-operating Relative Humidity: 15 to 90% (non-condensing)
|
