Que recherchez-vous ?


Référence - oicp-mbd-pdsmi+
Note moyenne : 0 avis
229.00€ HT
Garantie :   Garantie : 1 an

Carte Mère ATX Intel® Xeon®3200/3000 Series, Core™ 2 Quad/Duo/Extreme Series, Pentium® 4/D/Extreme Edition, & Celeron D in LGA775, jusqu'à 8GB DDR2 667 SDRAM, 2 Gbe LAN, 4 SATA2, PCI, PCI-X or PCI-E.

Ajouter au panier
Demander un devis

Notes et avis


1. Intel® Xeon® 3200 / 3000 Series, Core™ 2 Quad / Duo / Extreme Series, Pentium® D, Pentium Extreme Edition, Pentium 4 & Celeron D in LGA775
    Package (FSB 1066/800/533)
2. Intel® 3000 (Mukilteo-2) Chipset
3. Up to 8GB unbuffered ECC / non-ECC  DDR2 667/533MHz SDRAM
4. 1x Intel® 82573L PCI-e Gigabit LAN
    1x Intel® 82573V PCI-e Gigabit LAN
5. Built-in SATA Controller
    4x SATA (3 Gbps) Drive with
    RAID 0, 1, 5, 10 Support
6. 1 (x8) PCI-Express or 
    1x 64-bit 133MHz PCI-X,
    1x 32-bit 33MHz PCI
7. On board ATI ES1000 Graphics
8. IPMI 2.0 Support (AOC-IPMI20-E)


Description du produit

Physical Stats
Form Factor
12" x 9.6", (30.5cm x 24.4cm), 6 layers PCB
Single LGA775 ZIF Socket
Supports a Quad-Core Intel® Xeon® 3200 series processor
Supports a Dual-Core Intel® Xeon® 3000 series processor
Supports a Quad-Core Intel® Core™2 Extreme series processor
Supports an Intel® Core™2 Quad series processor
Supports an Intel® Core™2 Duo series processor
Supports an Intel® Pentium® processor E2000 series
Supports a Dual-Core Intel® Pentium® D processor
Supports an Intel® Pentium® Extreme Edition processor
Supports an Intel® Pentium® 4 processor
Supports an Intel® Celeron® processor E1000 series
Supports an Intel® Celeron® processor 400 series
NOTE: This board DOES NOT support Q9000, E8000, E7000, E5000 series or 45nm processor
System Bus
1066 / 800 / 533 MHz system bus
System Memory
Memory Capacity
Four 240-pin DIMM sockets
Supports up to 8 GB of memory (Single / Dual Channel)
Memory Type
DDR2 667/533MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
DIMM Sizes
256 MB, 512 MB, 1 GB, 2GB
Memory Voltage
1.8V only
On-Board Devices
Intel 3000 (Mukilteo-2) chipset
ICH7R + PXH-V + Intel® 82573V + Intel® 82573L
Serial ATA
Intel® ICH7R SATA2 (3 Gbps) controller built-in
RAID 0, 1, 5, 10 support (Windows Only)
RAID 0 (Two, three, four drives only)
RAID 1 (Two hard drives only)
Support for Intelligent Platform Management Interface v.2.0
(Optional: AOC-IPMI20-E)
Network Controllers
1x Intel® 82573V Gigabit PCI-Express Ethernet
1x Intel® 82573L Gigabit PCI-Express Ethernet
Supports 10Base-T, 100Base-TX, 1000BASE-T, RJ45 output
On-board ATI ES1000 16MB graphics
Super I/O
Winbond 83627EHG chip
Clock Generator
Input / Output
Serial ATA
Four Serial ATA ports (3 Gbps performance)
Four SATA hard drives supported
One EIDE channel supports up to two UDMA IDE devices
IDE Master / Slave 2 ports
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
White Connector for Compact Flash (CF, 40-pin IDE connector) card only
1 Floppy controller; 1.44 MB
2x RJ45 LAN ports
Up to 6x USB 2.0 compliant / 1.1 compatible ports
4x Internal USB headers
2x Rear USB ports
1x VGA Port
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Ports
1x Fast UART 16550 serial port
1x Header
Parallel Port
1x ECP / EEP Parallel Header
Chassis ( Optimized for PDSMi+ )
4U / Tower
Important Note
To ensure system stability, a ATX power supply w/ 4A (minimum) on 5V Standby is required
Only Supermicro 1U chassis is recommended for 1U Building Block Solutions
Expansion Slots
Universal Slot
1 (x8) PCI-Express Slot (via Riser Card) OR
1x 64-bit PCI-X 133MHz Slot (via Riser Card)
1x 32-bit 33MHz PCI (3.3V) slot
System BIOS
8Mb Flash EEPROM with Phoenix BIOS®
BIOS Features
Plug and Play (PnP)
DMI 2.3 support
PCI 2.2
ACPI 1.0
USB Keyboard support
Optional IPMI (Intelligent Platform Management Interface) 2.0
SuperDoctor® III
Watch Dog
Power Configurations
ACPI/APM Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode control for AC power loss recovery
Internal / External Modem Rign-on
PC Health Monitoring
Monitors for CPU Cores (+1.8V, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT)
CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
Adjustable CPU clock frequency ratio
Fan Speed Control
Total of six 4-pin fan headers
6x fans with tachometer monitoring
Status monitor with firmware speed control
Low noise fan speed control
Status monitor for on/off control
Support 3-pin fans (without speed control)
Pulse Width Modulated (PWM) fan connector
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor (TM2) Support
CPU / System Overheat LED
+5V Standby Alert LED
Suspend-state indicator LED
Other Features
Chassis Intrusion Detection
Chassis Intrusion Header
Operating Environment
Environmental Spec.
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
Passed to meet FCC standard requirement


Retour en haut
Notes et avis

Avis des internautes sur MBD-PDSMi+ (0 avis)

Il n'y a actuellement aucun avis pour cet article, soyez le premier à donner le votre.
[Ajouter votre commentaire]
Retour en haut