Image de diaporama
Que recherchez-vous ?
MBD-PDSMi-LN4+
Zoom

Marques

Format Carte Mère

MBD-PDSMi-LN4+

Référence - oicp-mbd-pdsmi-ln4+
Note moyenne : 0 avis
569.00€ HT
Quantité 
+
-
Garantie :   Garantie : 1 an

Carte Mère ATX Intel® Xeon®3200/3000 Series, Core™ 2 Quad/Duo/Extreme Series, Pentium® 4/D/Extreme Edition, & Celeron D in LGA775, jusqu'à 8GB DDR2 SDRAM, 4 Gbe LAN, 4 SATA2, PCI, PCI-X, IPMI

Demander un devis

MBD-PDSMi-LN4+
Notes et avis

Fonctionnalités


1. Intel® Xeon® 3200 / 3000 Series, Core™ 2 Quad / Duo / Extreme Series, Pentium® D, Pentium Extreme Edition, Pentium 4 & Celeron D in LGA775
    Package (FSB 1066/800/533)
2. Intel® 3000 (Mukilteo-2) Chipset
3. Up to 8GB unbuffered ECC / non-ECC DDR2 667/533 SDRAM
4. 4x Intel® 82573V/L PCI-e Gigabit  LAN Ports
5. Built-in SATA ICH7R Controller
    4x SATA (3 Gbps) Drive with RAID 0, 1, 5, 10 Support
6. 1x 64-bit 133MHz PCI-X,
    1x 32-bit 33MHz PCI
7. On board XGI Volari Z7 Graphics
8. IPMI 2.0 Support (AOC-IPMI20-E)

 

Description du produit


Physical Stats
Form Factor
ATX
Dimensions
12" x 9.6", (30.5cm x 24.4cm), 6 layers 
 
Processor/Cache
CPU
Single LGA775 ZIF Socket
Supports a Quad-Core Intel® Xeon® 3200 series processor
Supports a Dual-Core Intel® Xeon® 3000 series processor
Supports a Quad-Core Intel® Core™2 Extreme series processor
Supports an Intel® Core™2 Quad series processor
Supports an Intel® Core™2 Duo series processor
Supports an Intel® Pentium® processor E2000 series
Supports a Dual-Core Intel® Pentium® D processor
Supports an Intel® Pentium® Extreme Edition processor
Supports an Intel® Pentium® 4 processor
Supports an Intel® Celeron® processor E1000 series
Supports an Intel® Celeron® processor 400 series
NOTE: This board DOES NOT support Q9000, E8000, E7000, E5000 series or 45nm processor
 
System Bus
1066 / 800 / 533 MHz system bus
 
System Memory
Memory Capacity
Four 240-pin DIMM sockets
Supports up to 8 GB of unbuffered ECC / non-ECC DDR2 667/533MHz memory (Dual Channel)
 
Memory Type
DDR2 667/533MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
 
DIMM Sizes
256 MB, 512 MB, 1 GB, 2GB
 
Memory Voltage
1.8V only
 
On-Board Devices
Chipset
Intel 3000 (Mukilteo-2) chipset
ICH7R + PXH-V + Intel® 82573V + Intel® 82573L
 
Serial ATA
Intel® ICH7R SATA2 (3 Gbps) controller built-in
Intel:
RAID 0, 1, 5, 10 support (Windows Only)
Adaptec:
RAID 0 (Two, three, four drives only)
RAID 1 (Two hard drives only)
IPMI
1U support for Intelligent Platform Management Interface v.2.0 (Optional: AOC-IPMI20-E )
 
Network Controllers
Dual double-stack ports using 1x Intel® 82573V and 3x Intel® 82573L Gigabit PCI-Express Ethernet Controllers, Four ports total
Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45 output
 
VGA
On-board XGI Volari Z7 graphics
 
Super I/O
Winbond 83627HG chip
 
Clock Generator
CK410
 
Input / Output
Serial ATA
Four Serial ATA ports (3 Gbps performance)
Four SATA hard drives supported
 
IDE
One EIDE channel supports up to two UDMA IDE devices
IDE Master / Slave 2 ports
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
White Connector for Compact Flash (CF, 40-pin IDE connector) card only
 
Floppy
1 Floppy controller; 1.44 MB
 
LAN
4x RJ45 LAN ports
 
USB
USB 2.0 compliant / 1.1 compatible
4x internal USB headers
2x rear ports
 
VGA
1x VGA Port
 
Keyboard / Mouse
PS/2 keyboard and mouse ports
 
Serial Ports
1x Fast UART 16550 serial port
1x Header
 
Parallel Port
1x ECP / EEP Parallel Header
 
Chassis ( Optimized for PDSMi-LN4+ )
4U / Tower
SC743i-645
Important Note
To ensure system stability, a ATX power supply w/ 4A (minimum) on 5V Standby
is required
Only Supermicro 1U chassis is recommended for 1U Building Block Solutions
 
Expansion Slots
PCI-X
1x 64-bit PCI-X 133MHz slot
PCI
1x 32-bit 33MHz PCI (5V) slot
Note
Riser Card required for 1U systems
 
System BIOS
BIOS Type
8Mb Flash EEPROM with Phoenix BIOS®
 
BIOS Features
Plug and Play (PnP)
DMI 2.3 support
PCI 2.2
ACPI 1.0
SMBIOS 2.3
USB Keyboard support
 
Management
Software
Optional IPMI (Intelligent Platform Management Interface) 2.0
SuperDoctor® III
Watch Dog
NMI
W83793 H/W Monitor
 
Power Configurations
ACPI/APM Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode control for AC power loss recovery
Internal / External Modem Rign-on
 
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.5V, +3.3V, +5, ±12V, +5V Standby
CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
Adjustable CPU clock frequency ratio
 
FAN
Fan Speed Control
6x 4-pin fan headers
6x fans with tachometer monitoring
Status monitor with firmware speed control
Low noise fan speed control
Status monitor for on/off control
Support 3-pin fans (without speed control)
Pulse Width Modulated (PWM) fan connector
 
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor 2 (TM2) support
PECI
 
LED
CPU / System Overheat LED
Standby Power alert LED
 
Other Features
Chassis Intrusion Detection
Chassis Intrusion Header
 
Operating Environment
Environmental Spec.
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
 
Regulatory
FCC
Passed to meet FCC standard requirement

 

 
Retour en haut
MBD-PDSMi-LN4+
Notes et avis

Avis des internautes sur MBD-PDSMi-LN4+ (0 avis)

Il n'y a actuellement aucun avis pour cet article, soyez le premier à donner le votre.
[Ajouter votre commentaire]
Retour en haut