Que recherchez-vous ?


Référence - oicp-mbd-x7dbr-3
Note moyenne : 0 avis
459.00€ HT
Garantie :   Garantie : 1 an

Carte Mère format ATX étendue Dual 771-pin LGA Sockets pour processeurs Intel® Quad & Dual Core 64-bit Xeon, jusqu'à 32GB DDR2, 2 Gbe LAN, 6 SATA-II, IPMI, 5 USB 2.0

Ajouter au panier
Demander un devis

Notes et avis


1. Quad & Dual Core Intel® 64-bit Xeon® Support, 667 / 1066 / 1333MHz FSB
2. Intel® 5000P (Blackford) Chipset
3. Up to 32GB DDR2 667 & 533 SDRAM Fully Buffered DIMM (FB-DIMM)
4. Intel® (ESB2/Gilgal) 82563EB Dual-port Gigabit Ethernet Controller
5. Adaptec AIC-9410 Dual-Channel SAS Controller, 8-port with Host RAID 0,1,10
6. 6x SATA 3.0Gbps Ports via ESB2 Controller
7. Left Universal Slot (Riser Card Required):
    1 64-bit 133MHz PCI-X OR
    1 (x8) PCI-Express
8. Right Universal Slot (Riser Card Required):
    1 64-bit 100MHz PCI-X OR
    1 (x8) PCI-Express
9. Zero-Channel RAID Support
10. ATI ES1000 Graphics with 16MB video memory
11. IPMI 2.0 (SIMSO) Socket

Description du produit

Physical Stats
Form Factor
Extended ATX
13.05" x 12" (33.1cm x 30.5cm)
Dual 771-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
Quad-Core Intel® Xeon®Processor 5400/5300 sequence (Harpertown/Clovertown processor)
up to 3.16 GHz
Dual-Core Intel® Xeon®Processor 5200/5100/5000 sequence (Wolfdale/Woodcrest/Dempsey processor) up to 3.40 GHz


System Bus
1333 / 1066 / 667 MHz system bus
Operating System Software
Supports 64-bit Operating Systems
Supports 32-bit Operating Systems
System Memory
Memory Capacity
Eight 240-pin DIMM sockets
Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
Memory Mirroring supported
Memory Type
667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs


DIMM Sizes
512 MB, 1GB, 2GB, 4GB
Memory Voltage
1.8V only
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
Intel® 5000P (Blackford) chipset
Adaptec AIC-9410 Serial-Attached SCSI (SAS) Controller
Dual-Channel SAS (1 internal, 1 external)
Each SAS channel supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives
Host RAID 0, 1, & 10 support
Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows Only)
RAID 0, 1, 10 support (Linux)
Support for Zero-Channel RAID
Optional: (Card not included)
RAID 0, 1, 5, 10
Support for Intelligent Platform Management Interface v.2.0
200-pin IPMI SO-DIMM socket (SIMSO)
(Optional: AOC-SIMSO(+))
Network Controllers
Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking
ATI ES1000 controller with 16 MB of video memory
Super I/O
Winbond 83627HG chip
Input / Output
Eight SAS / SATA ports (4 internal, 4 external)
Dual-Channel SAS controller
Eight SAS / SATA hard drives supported
Serial ATA
Six Serial ATA ports
3 Gbps transfer rate
Six SATA hard drives supported
Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
Compact Flash (40-pin connector, IDE 1, single channel) slot
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
1 Floppy controller; 1.44 MB, 2.88 MB
2x RJ45 LAN ports
2x USB rear ports
3x USB internal headers
Total 5 USB 2.0 Compliant / 1.1 Compliant
1x VGA Port
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Port / Header
1 Fast UART 16550 serial port
1 Fast UART 16550 serial header
Chassis ( Optimized for X7DBR-3 )
1U Chassis
Important Chassis Notes
To ensure system stability, a 500W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
Expansion Slots
Left Universal Slot
1 64-bit 133MHz PCI-X OR
1 (x8) PCI-e Slot
Riser Card Required
Right Universal Slot
1 64-bit 100MHz PCI-X OR
1 (x8) PCI-e Slot
Riser Card Required
System BIOS
8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features
Plug and Play (PnP)
DMI 2.1
PCI 2.2
ACPI 1.0
USB Keyboard support
Hardware BIOS Virus protection
Optional IPMI (Intelligent Platform Management Interface) 2.0
SuperDoctor® III
Watch Dog
Power Configurations
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
Internal / External modem remote ring-on
PC Health Monitoring
Monitors for CPU Cores, +3.3V, +5V, ±12V, +1.2V
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
Total of eight 4-pin fan headers supporting up to 8 fans
8x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x fan connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
CPU / System Overheat LED
Other Features
Chassis intrusion detection
Chassis intrusion header
SDDC Support
Operating Environment
Environmental Spec.
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
Passed to meet FCC standard requirement


Retour en haut
Notes et avis

Avis des internautes sur MBD-X7DBR-3 (0 avis)

Il n'y a actuellement aucun avis pour cet article, soyez le premier à donner le votre.
[Ajouter votre commentaire]
Retour en haut