|
Chassis ( Optimized for X7DBR-8+ )
1U Chassis
CSE-815S-700V
CSE-815S-560
Important Chassis Notes
To ensure system stability, a 560W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 20-pin are required]
Expansion Slots (For 1U Systems)
Left Universal Slot
1 64-bit 133MHz PCI-X OR
1 (x8) PCI-e Slot
Expansion Slots (For 2U Systems)
Left Universal Slot
1 64-bit 133MHz PCI-X OR
2 (x8) PCI-e Slots OR
3 64-bit 133MHz PCI-X
Right Slot
1 (x8) PCI-e Slot (For 2U Only)
System BIOS
BIOS Type
8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features
Plug and Play (PnP)
SMBIOS 2.3
DMI 2.1
PCI 2.2
PCI-X 1.0
ACPI 1.0
USB Keyboard support
Hardware Bios Virus protection
Management
Software
Optional IPMI (Intelligent Platform Management Interface) 2.0
SuperDoctor® III
Watch Dog
NMI
Power Configurations
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
Internal / External modem remote ring-on
PC Health Monitoring
Voltage
Monitors for CPU Cores, +3.3V, +5V, ±12V, +1.2V, 1.5V, +5V Standby, VBAT
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
Total of five 3-pin fan headers supporting up to 5 fans
5x fans with tachometer status monitoring
Status monitor for speed control
Support 3-pin fans
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 5x fan connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
LED
CPU / System Overheat LED
Other Features
Chassis intrusion detection
Chassis intrusion header
SDDC Support
Operating Environment
Environmental Spec.
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
Regulatory
FCC
Passed to meet FCC standard requirement
|
