Image de diaporama
Que recherchez-vous ?
MBD-X7DCL-3
Zoom

Marques

Format Carte Mère

MBD-X7DCL-3

Référence - oicp-mbd-x7dcl-3
Note moyenne : 0 avis
Quantité 
+
-
Garantie :   Garantie : 1 an

Carte Mère format ATX Dual 771-pin LGA Sockets pour processeurs Intel® Quad & Dual Core 64-bit Xeon
Max 48GB DDR2
2 Gbe LAN
8 SAS/SATA ports
6 SATA-II, 5 USB 2.0, IPMI

Demander un devis

MBD-X7DCL-3
Notes et avis

Fonctionnalités


1. Dual Intel® 64-bit Xeon® Quad-Core or  Dual-Core, with 1333 / 1066 MHz FSB
2. Intel® 5100 (San Clemente) Chipset
3. Up to 48GB 667/533MHZ DDR2 ECC Register SDRAM *
4. Intel® 82573V and Intel® 82573L Gigabit Ethernet Controller
5. Broadcom 1068E 8-Port SAS Controller
6. 6x SATA (3 Gbps) Ports via ICH9R SB  Controller
7. 2 (x8) PCI-E, 1 (x4) PCI-E (in x8 slot),
    3x 32-bit PCI slots
8. XGI Z9 Graphics with 32MB video memory
9. Low Profile IPMI 2.0 (SIMLC) Slot

 

Description du produit


Form Factor
ATX
Dimensions
12.05" x 10" (30.6cm x 25.4cm)
 
Processor/Cache
CPU
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
Quad-Core Intel® Xeon®Processor 5400/5300 sequence (Harpertown/Clovertown processor) 
up to 3.16 GHz
Dual-Core Intel® Xeon®Processor  5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
 
System Bus
1333 / 1066 MHz system bus
 
Operating System Software
Supports 64-bit Operating Systems
Supports 32-bit Operating Systems
 
System Memory
Memory Capacity
Six 240-pin DIMM sockets
Supports up to 48GB 667/ 533MHz DDR2 ECC Register Single/Dual Rank memory *
Dual channel memory bus
Memory must be populated in pairs
 
Memory Type
667/533MHz Register DDR2 ECC Single/Dual Rank SDRAM 72-bit, 240-pin gold-plated DIMMs *
 
DIMM Sizes
256MB, 512MB, 1GB, 2GB, 4GB, 8GB**
 
Memory Voltage
1.8V only
 
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
Intel® 5100 (San Clemente) chipset
Intel® ICH9R
 
SAS
Broadcom SAS1068E
RAID 0, 1, 10 support
(Optional: AOC-IButton68) RAID 5 support
 
SATA
Intel ICH9R SB SATAII Controller
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux)
 
IPMI
Support for Intelligent Platform Management Interface v.2.0 / 1.5
200-pin IPMI slot (SIMLC)
(Optional: AOC-SIMLC)
NOTE: KVM-over-LAN supported w/ AOC-SIM1U+ - PCB 1.1A only
 
Network Controllers
Intel® 82573V & 82573L Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
 
Graphics
XGI Z9 with 32 MB of video memory
Super I/O
Winbond W83627HG-AW chip
 
Clock Generator
CK505 chip
 
Input / Output
SAS
8 SAS / SATA ports
 
Serial ATA
Six Serial ATA ports
Six SATA hard drives supported
 
IDE
Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Compact Flash (40-pin connector, IDE 1, single channel) slot
 
Floppy
1 Floppy controller; 1.44 MB, 2.88 MB
 
LAN
2x RJ45 LAN ports
 
USB
2x USB rear ports
3x USB internal header
5 total USB ports, 2.0 Compliant / 1.1 Compliant
 
VGA
1x VGA Port
 
Keyboard / Mouse
PS/2 keyboard and mouse ports
 
Serial Port / Header
1 Fast UART 16550 serial port
1 Header
 
Chassis ( Optimized for X7DCL-3 )
1U Chassis
CSE-813MTQ-520C
CSE-813MTQ-280C
CSE-813MT-420C
CSE-813MT-410C
2U Chassis
CSE-823TQ-550LP
CSE-823T-550LP
CSE-823MTQ-R700LP
CSE-825TQ-560LP
CSE-825MTQ-R700LP
Mid Tower
CSE-733TQ-645
CSE-733TQ-465
Tower / 4U Rackmount
CSE-743T-645
Important Chassis Notes
To ensure system stability, a 500W (minimum) ATX power supply
[8-pin (+12V) and 24-pin are required]
 
Expansion Slots
PCI-Express
2 (x8) PCI-e slots
1 (x4) PCI-e (using x8) slot
 
PCI
3x 32-bit PCI slots
 
System BIOS
BIOS Type
8Mb Flash EEPROM with Phoenix ® BIOS
 
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0/2.0/3.0
USB Keyboard support
Hardware BIOS Virus protection
SMBIOS 2.5
 
Management
Software
Optional IPMI (Intelligent Platform Management Interface) v1.5 / 2.0
SuperDoctor® III
Watch Dog
NMI
 
Power Configurations
ACPI Power Management
Main Switch Override Mechansim
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
Internal/External modem remote ring-on
 
PC Health Monitoring
Voltage
Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby,
VBAT, HT, Memory, Chipset
CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
 
FAN
Total of six 4-pin fans
6x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Support for 3-pins (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
 
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 6x Fan Connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
 
LED
CPU / System Overheat LED
Suspend-state Indicator LED
 
Other Features
Chassis intrusion detection
Chassis intrusion header
Chipkill Support
 
Operating Environment
Environmental Spec.
Operating Temperature: 10° to 35°C (50° to 95°F)
Non-operating Temperature: -40° to 70°C (-40° to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)

 

Retour en haut
MBD-X7DCL-3
Notes et avis

Avis des internautes sur MBD-X7DCL-3 (0 avis)

Il n'y a actuellement aucun avis pour cet article, soyez le premier à donner le votre.
[Ajouter votre commentaire]
Retour en haut