Que recherchez-vous ?
MBD-X7DCX
Zoom

Marques

Format Carte Mère

MBD-X7DCX

Référence - oicp-mbd-x7dcx
Note moyenne : 0 avis
Quantité 
+
-
Garantie :   Garantie : 1 an

Carte Mère format ATX étendue Dual 771-pin LGA Sockets pour processeurs Intel® Quad & Dual Core 64-bit Xeon
Max 48GB DDR2
2 Gbe LAN
6 SATA-II, 8 USB 2.0, IPMI

Demander un devis

MBD-X7DCX
Notes et avis

Fonctionnalités


1. Dual Intel® 64-bit Xeon® Quad-Core or  Dual-Core, with 1333 / 1066 MHz FSB
2. Intel® 5100 (San Clemente) Chipset
3. Up to 48GB 667/533MHZ DDR2 ECC Register SDRAM
4. Intel® Dual 82573V/L Gigabit Ethernet Controller

5. 6x SATA2 (3 Gbps) Ports via  ICH9R SB Controller
6. 5 (x8) PCI-e (1 in x16 slots),,
    1 (x4) PCI-e (using x8 slot),
    1x PCI 33MHz slots
7. XGI Z9s Graphics with 32 MB  DDR2 memory
8. IPMI 2.0 (SIMSO) slot

 

Description du produit


Form Factor
Extended ATX
Dimensions
12" x 13.05" (30.5cm x 33.2cm)
 
Processor/Cache
CPU
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
Quad-Core Intel® Xeon®Processor  5400/5300 sequence (Harpertown/Clovertown processor) 
up to 3.16 GHz
Dual-Core Intel® Xeon®Processor  5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
 
System Bus
1333 / 1066 MHz system bus
 
Operating System Software
Supports 64-bit Operating Systems
Supports 32-bit Operating Systems
 
System Memory
Memory Capacity
Six 240-pin DIMM sockets
Supports up to 48GB 667/533MHz DDR2 ECC Register SDRAM
Dual channel memory bus
Memory must be populated in pairs
 
Memory Type
667/533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
512MB, 1GB, 2GB, 4GB, 8GB**
 
Memory Voltage
1.8 V
 
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
Intel® 5100 (San Clemente) chipset
Intel® ICH9R
 
SATA
Intel ICH9R SB SATAII Controller
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux)
 
IPMI
Support for Intelligent Platform Management Interface v.2.0 / 1.5
200-pin IPMI slot (SIMSO(+))
(Optional: AOC-SIMSO(+))
For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
 
Network Controllers
Dual Intel® 82573V/L Single Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
 
Graphics
XGI Z9s with 32 MB of DDR2 memory
 
Super I/O
Winbond 83627DHG chip
 
Clock Generator
ICS9LPR501 chip
 
Input / Output
Serial ATA
6 Serial ATA ports
6 SATA hard drives supported
 
IDE
Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Compact Flash (40-pin connector, IDE 1, single channel) slot
 
Floppy
1 Floppy controller; 1.44 MB
 
LAN
2x RJ45 LAN ports
 
USB
2 rear + 2 Type A connectors + 2 headers (4 Ports)
8 total USB ports, 2.0 Compliantt
 
VGA
1x VGA Port
 
Keyboard / Mouse
PS/2 keyboard and mouse ports
 
Serial Port / Header
1 Fast UART 16550 serial port
1 header
 
Chassis ( Optimized for X7DCX)
Tower / 4U Rackmount
CSE-745TQ-R800
CSE-745TQ-800
CSE-743TQ-R760
CSE-743T-R760
CSE-743i-R760
CSE-743T-650
CSE-743i-650
CSE-743T-645  (FAN-0091 Required)
CSE-743i-645  (FAN-0091 Required)
Important Chassis Notes
To ensure system stability, a 500W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
 
Expansion Slots
PCI-Express
5 (x8) PCI-e (1 in x16) slots
1 (x4) PCI-e (using x8) slot
 
PCI
1x 32-bit 33MHz PCI (5V) slots
 
System BIOS
BIOS Type
16Mb SPI Flash with Phoenix ® BIOS
 
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0/2.0/3.0
USB Keyboard support
Hardware BIOS Virus protection
SMBIOS 2.3
 
Management
Software
SuperDoctor® III
Watch Dog
NMI
 
Power Configurations
ACPI Power Management
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
CPU Fan auto-off in sleep mode
Power-on mode for AC power recovery
Internal/External modem remote ring-on
 
PC Health Monitoring
Voltage
Monitors for CPU Cores,+1.5V, +3.3V, +5V, ±12V, +5 Stdby, VBAT
CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
 
FAN
Eight 4-pin fan headers
8x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Support for 3-pins (w speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
 
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
PSU I2C temperature sensing logic
 
LED
CPU / System Overheat LED
Suspend-state Indicator LED
+5V Standby alert LED
 
Other Features
Chassis Intrusion Detection
Chassis Intrusion Header
 
Operating Environment
Environmental Spec.
Operating Temperature: 10° to 35°C (50° to 95°F)
Non-operating Temperature: -40° to 70°C (-40° to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)

 

Retour en haut
MBD-X7DCX
Notes et avis

Avis des internautes sur MBD-X7DCX (0 avis)

Il n'y a actuellement aucun avis pour cet article, soyez le premier à donner le votre.
[Ajouter votre commentaire]
Retour en haut