Image de diaporama
Que recherchez-vous ?
MBD-X7SBi-LN4
Zoom

Marques

Format Carte Mère

MBD-X7SBi-LN4

Référence - oicp-mbd-x7sbi-ln4
Note moyenne : 0 avis
449.00€ HT
Quantité 
+
-
Garantie :   Garantie : 1 an

Carte Mère ATX Intel Xeon et Intel Core (LGA775), jusqu'à 8GB unbuffered ECC/ non ECC DDR2 800 SDRAM, 4x Intel Gigabit LAN, 6x SATA (3Gbps), 1x PCI-X (64bit), 1x PCI (32bit), IPMI 2.0

Ajouter au panier
Demander un devis

MBD-X7SBi-LN4
Notes et avis

Fonctionnalités


1. Intel® Xeon® 3000 Sequence and Core™ 2 Quad / Duo Series in LGA775 Package (FSB 1333/1066/800 MHz)
2. Intel® 3200 + ICH9R Chipset
3. Up to 8GB unbuffered ECC / non-ECC DDR2 800/667 SDRAM
4. 4x Intel® 82573V/L PCI-E Gigabit Controllers
5. Built-in SATA ICH9R Controller
    6x SATA (3 Gbps) Drive with
    RAID 0, 1, 5, 10 Support
6. 1 64 bit PCI-X 133 Mhz, 1 32 bit PCI slots
7. On board ATI ES1000 32MB Graphics
8. SIMSO IPMI 2.0 Support

Description du produit


Physical Stats
Form Factor ATX
Dimensions 12" x 9.6 ", (30.48cm x 24.38 cm)
 
Processor/Cache
CPU
Single LGA775 ZIF Socket
Supports Quad-Core Intel® Xeon® X3300/X3200 series
Supports Dual-Core Intel® Xeon® E3100/3000 series
Supports Intel® Xeon® processor L3360 and L3110 series
Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series
Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
Supports Intel® Pentium® E5000/E2000 series
Supports Intel® Celeron® E1000 and 400 series
NOTE: Intel Xeon processor L3014 requires an LGA771 socket and is not supported.
 
System Bus
1333 / 1066 / 800 MHz system bus
 
System Memory
Memory Capacity
Four 240-pin DIMM slots
Supports up to 8 GB of unbuffered ECC / non-ECC DDR2 800/667MHz memory (Dual Channel)
 
Memory Type
DDR2 800/667MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
 
DIMM Sizes
256 MB, 512 MB, 1 GB, 2GB
 
Memory Voltage
1.8V only
 
On-Board Devices
Chipset
Intel® 3200 chipset
ICH9R chipset
 
Serial ATA
Intel® ICH9R SATA2 (3 Gbps) controller built-in
RAID 0, 1, 5, 10 support (Windows Only)
RAID 0, 1, 10 support (Linux)
 
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
SIMSO Slot - Supermicro Intelligement Management
(Optional: AOC-SIMSO-HTC, AOC-SIMSO+)
NOTE: AOC-SIMSO+ must use Dedicated LAN for KVM-over-LAN function
 
Network Controllers
4x Single-port Intel® 82573V/L Gigabit PCI-Express Ethernet Controllers
Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
 
VGA
On-board ATI ES1000 (32MB) graphics
 
Super I/O
Winbond 83627HF chip
 
Clock Generator
IC59LPRS511
 
Input / Output
Serial ATA
Six Serial ATA ports (3 Gbps performance)
Six SATA hard drives supported
 
IDE
One EIDE channel supports up to two UDMA IDE devices
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
 
Floppy
1 Floppy controller; 1.44 MB
 
LAN
4x RJ45 LAN ports
 
USB
8x USB 2.0 / 1.1 compatible
2 rear ports + 2 headers + 2 on-board connectors
 
VGA
1x VGA port
 
Keyboard / Mouse
PS/2 keyboard and mouse ports
 
Serial Ports
1x Fast UART 16550 serial port
1x internal header
 
Parallel Port
1x ECP / EEP Parallel Header
 
Chassis ( Optimized for X7SBi-LN4 )
1U Chassis
CSE-512-200B
CSE-512F-260
CSE-512L-260B
CSE-513F-260B
CSE-513L-260
CSE-811T-260
CSE-813MT-300C
Mid-Tower
CSE-733E-465B
CSE-733i-465B
CSE-733T-465B
CSE-733TQ-465B
Tower / 4U Rackmount
CSE-743TQ-865B
Important Note
For a general system, a 420W (minimum) ATX12V power supply [8-pin +12V AND 24-pin
is recommended to assure system stability].
 
Expansion Slots
PCI-X
1 64 bit PCI-X 133 Mhz slot
PCI
1 32 bit PCI slot
 
System BIOS
BIOS Type
16Mb Flash EEPROM with Phoenix BIOS®
 
BIOS Features
Plug and Play (PnP)
DMI 2.3 support
PCI 2.2
ACPI 1.0/2.0
USB Keyboard support
SMBIOS 2.3
 
Management
Software
Optional IPMI (Intelligent Platform Management Interface) 2.0
SuperDoctor® III
Watch Dog
NMI
W83793 H/W Monitor
 
Power Configurations
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode control for AC power loss recovery
Internal/External modem remote ring-on
Suspend to RAM(STR)
 
PC Health Monitoring
Voltage
Monitors for CPU Cores +1.8V, +3.3V, +5V, ±12V, 3.3V Standby, 5V Standby, VBAT
CPU 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
Adjustable CPU clock frequency ratio (Only available if CPU is supported)
 
FAN
Total of six 4-pin fan headers
6x fans with tachometer monitoring
Status monitor with firmware / software speed control
Status monitor for on/off control
Support 3-pin fans (without speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connector
 
Temperature
Monitoring for CPU and chassis environment
CPU Thermal Trip support
Thermal Monitor (TM2) Support
PECI
 
LED
CPU / System Overheat LED
Suspend state indicator LED
+5 Standby alert LED
 
Other Features
Chassis intrusion detection
Chassis intrusion header
 
Operating Environment
Environmental Spec.
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)

 

Retour en haut
MBD-X7SBi-LN4
Notes et avis

Avis des internautes sur MBD-X7SBi-LN4 (0 avis)

Il n'y a actuellement aucun avis pour cet article, soyez le premier à donner le votre.
[Ajouter votre commentaire]
Retour en haut