Que recherchez-vous ?
MBD-X7SLM+
Zoom

Marques

Format Carte Mère

MBD-X7SLM+

Référence - oicp-mbd-x7slm+
Note moyenne : 0 avis
249.00 € HT
Quantité 
+
-
Garantie :   Garantie : 1 an

Carte Mère micro ATX Intel. Single socket LGA 775, jusqu'à 2GB non ECC DDR2 667/533MHz SDRAM, 2x Intel Gigabit LAN, 4x SATA 2.0, 1x PCI-E 2.0 (x8), 1 x PCI slot, 5 USB 2.0, TPM support.

Ajouter au panier

Demander un devis

MBD-X7SLM+
Notes et avis

Fonctionnalités


 
1. Intel® Core™2 Duo, Pentium® D, Pentium 4 & Celeron D in LGA775 Package (FSB 1066/800/533)
2. Intel® 945GC Chipset
3. Up to 2GB dual channel unbuffered, non-ECC DDR2 667/533/400 SDRAM
4. 2x Realtek RTL8111C Gigabit LAN Port
5. Built-in SATA2 Controller
    4x SATA (3Gb/s) Drive Support
6. 1 (x8) PCI-Express and
    1x 32-bit 33MHz PCI slot
7. Onboard GMA950 Video
8. 2 rear USB ports + 1 TypeA connector  + 1 header (2 ports)
9. TPM Support
 

Description du produit


Physical Stats
Form Factor µATX
Dimensions 9.6" x 9.6 ", (24.4cm x 24.4 cm)
 
Processor/Cache
CPU
Single LGA775 ZIF Socket
Supports an Intel® Core™2 Duo E4000 Series
Supports an Intel® Pentium® E2000 Series
Supports an Intel® Pentium® D 945, 935, 925, 915 and 820, 805
Supports an Intel® Pentium® 4 600 and 500 Series
Supports an Intel® Celeron® E1000 Series
Supports an Intel® Celeron® 400 Series
Supports an Intel® Celeron® D 300 Series
System Bus
1066 / 800 / 533 MHz system bus
 
System Memory
Memory Capacity
Two 240-pin DIMM sockets
Supports up to 2 GB of unbuffered, non-ECC DDR2 667/533MHz memory (Single / Dual Channel)
 
Memory Type
DDR2 667/533MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs
 
DIMM Sizes
256 MB, 512 MB, 1 GB, 2 GB
 
Memory Voltage
1.8V only
 
On-Board Devices
Chipset
Intel 945GC
ICH7R + Realtek RTL8111C
 
Serial ATA
Intel® ICH7R SATA2 (3 Gbps) controller built-in
 
Network Controllers
2x Realtek RTL8111C Gigabit Ethernet
Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
 
Graphics
Onboard GMA950 video
 
TPM
Infineon SLB9635TT
 
Super I/O
Winbond 83627DHG chip
 
Clock Generator
CK505
 
Input / Output
Serial ATA
Four Serial ATA ports ( 3Gb/s )
Four SATA hard drives supported
 
IDE
One EIDE channel supports up to two UDMA IDE devices
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
 
Floppy
1 Floppy controller; 1.44 MB
 
LAN
2x RJ45 LAN port
 
USB
5x USB 2.0 / 1.1 compatible
2 rear + 1 TypeA connector + 1 header (2 ports)
 
VGA
Intel GMA950 on chip
 
Keyboard / Mouse
PS/2 keyboard and mouse ports
 
Serial Ports
1x Fast UART 16550 serial port
1x Serial Header
 
Chassis ( Optimized for X7SLM+)
1U
CSE-502-200B
CSE-503-200B
CSE-510-200B
CSE-512-200B
Important Note
Only Supermicro 1U chassis is recommended for 1U Building Block Solutions
 
Expansion Slots
PCI-Express
1 (x8) PCI-Express Slot
PCI
1x 32-bit 33MHz PCI (5V) slots
 
System BIOS
BIOS Type
8Mb Flash EEPROM with PhoenixBIOS®
 
BIOS Features
Plug and Play (PnP)
APM 1.2
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
Hardware BIOS Virus protection
SMBIOS 2.3
 
Management
Software
SuperDoctor® III
Watch Dog
NMI
 
Power Configurations
ACPI/APM Power Management
Main Switch Override Mechanism
Suspend to RAM (STR)
Power-on mode control for AC power recovery
Internal / External modem remote ring-on
 
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT, HT, Memory,
Chipset
CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
 
FAN
Total of five 4-pin fan headers
5 x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on / off control
Support 3-pin PWM fans (with speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan conn.
 
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 5x Fan Connectors
I2C temperature sensing logic
Thermal Monitor 2 (TM2) Support
PECI
 
LED
CPU / System Overheat LED
Suspend-state indicator LED
+5V standby alert LED
 
Other Features
Chassis intrusion Detection
Chassis intrusion Header
SDDC Support
 
Operating Environment
Environmental Spec.
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
 
Regulatory
FCC
Passed to meet FCC standard requirement

 

 

 

 

 

 
 
Retour en haut
MBD-X7SLM+
Notes et avis

Avis des internautes sur MBD-X7SLM+ (0 avis)

pixel_trans
Il n'y a actuellement aucun avis pour cet article, soyez le premier à donner le votre.
pixel_trans
pixel_trans
[Ajouter votre commentaire]
Retour en haut
Ce site utilise des cookies destinés à optimiser votre expérience sur ce site et à vous proposer des offres correspondant à vos centres d’intérêt. En naviguant sur ce site, vous consentez à l’utilisation de ces cookies.
J’ai compris