Que recherchez-vous ?

MBD-X8DT6-F

Référence - oicp-mbd-x8dt6-f
Note moyenne : 0 avis
459.00 € HT
Quantité 
+
-
Garantie :   Garantie : 1 an

Carte Mère format ATX étendue Dual Socket (LGA 1366) pour processeurs Intel® Xeon® 5600/5500 serie
jusqu'à 192GB ECC DDR3
2 Gbe LAN
6 SATA2/8x 6Gb/s SAS
IPMI/ RJ45 LAN dédié , 8 USB 2.0

Demander un devis

MBD-X8DT6-F
Notes et avis

Fonctionnalités


1. Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
2. Intel® 5520 (Tylersburg) Chipset
3. Up to 192GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 48GB Unbuffered DIMM
4. Dual Intel® 82574L Gigabit Ethernet Controller
5. 6x SATA2 (3 Gbps) Ports via ICH10R Controller
6. 3 (x8) PCI-E 2.0,
    1 (x4) PCI-E 2.0 and 1 (x4) PCI-E slot
7. Integrated Matrox G200eW Graphics
8. Broadcom 2008 8-Port 6Gb/s SAS Controller; RAID 0, 1, 10; RAID 5 optional
9. Integrated IPMI 2.0 with Dedicated LAN
 

Description du produit


Physical Stats
Form Factor
Extended ATX
Dimensions
12" x 13" (30.5cm x 33cm)
 
Processor/Cache
CPU
Dual 1366-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
Intel® Xeon®Processor 5600 Series (Westmere)
Intel®Xeon®Processor 5500 Series (Nehalem-EP)
QPI
up to 6.4 GT/s
 
System Memory
Memory Capacity
12x 240-pin DIMM slots
Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
Memory Mirroring supported
 
Memory Type
1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
 
DIMM Sizes
1GB, 2GB, 4GB , 8GB , 16GB
 
Memory Voltage
1.5 V / 1.35V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
Intel® 5520 (Tylersburg) chipset
ICH10R + IOH-36D
 
SAS
Broadcom 6Gb/s SAS 2008
RAID 0, 1, 10 support
(Optional: AOC-SAS2-RAID5-KEY) RAID 5 support
 
SATA
Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
 
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Winbond® WPCM450 BMC
 
Network Controllers
2x Intel® 82574-L  Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
 
Graphics
Matrox G200eW 16MB DDR2
 
Super I/O
Winbond 83827HF chip
 
Input / Output
SAS
8x 6Gb/s SAS / SATA ports
 
Serial ATA
Six Serial ATA ports
Six SATA hard drives supported
 
Floppy
1 Floppy controller; 1.44 MB
 
LAN
2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port
 
USB
4x USB rear ports
2x USB on-board (TypeA)
4x USB internal headers
Total 8 USB 2.0 Compliant
 
VGA
1x VGA Port
 
Keyboard / Mouse
PS/2 keyboard and mouse ports
 
Serial Port / Header
1 Fast UART 16550 serial port
1 Fast UART 16550 serial header (Option)
 
Chassis ( Optimized for X8DT6-F )
 
1U Chassis 2U Chassis 3U Chassis Tower / 4U Rackmount
CSE-812L-600CB
 
CSE-216A-R900LPB
CSE-216E1-R900LPB
CSE-825TQ-560LPB
CSE-826E1-R800LPB
CSE-826E2-R800LP
CSE-826TQ-R800LPB
CSE-836E1-R800B
CSE-836E16-R1200B
CSE-836E2-R800B
CSE-836E26-R1200B
CSE-836TQ-R800B
CSE-933E1-R760B
CSE-933E2-R760B
CSE-933T-R760B
CSE-936A-R900B
CSE-936E1-R900
CSE-936E16-R1200B
CSE-936E26-R1200B
CSE-745TQ-920B
CSE-846E1-R900B
CSE-846E16-R1200B
CSE-846E2-R900
CSE-846E26-R1200B
CSE-846TQ-R900B
CSE-847A-R1400LPB

 

Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards,
a Revision K chassis is recommended for most models. 
 
Expansion Slots
PCI-Express
3 (x8) PCI-E 2.0 slots
1 (x4) PCI-E 2.0 slot
1 (x4) PCI-E slot
 
System BIOS
BIOS Type
32Mb SPI Flash EEPROM with AMI® BIOS
 
BIOS Features
Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support
 
Management
Software
IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
SuperDoctor® III
 
Power Configurations
ACPI / ACPM Power Management
 
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby,
VBAT, Memory, Chipset Voltages.
6-Phase-switching voltage regulatorwith auto-sense from 0.8375V-1.60V
 
FAN
Total of eight fan headers supporting up to 8 fans
Eight 4-pin fan headers
8x fans with tachometer status monitoring
Support 3-pin fans (w/o speed control)
Low noise fan speed control 
 
Temperature
Monitoring for CPU and chassis environment
Thermal Control for 8x fan connectors
PECI
 
Other Features
Chassis intrusion detection
Chassis intrusion header
 
Operating Environment
Environmental Spec.
Operating Temperature: 10° to 35° C (50° to 95°F)
Non-operating Temperature: -40° to 70° C (-40° to 158° F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)

 

Retour en haut
MBD-X8DT6-F
Notes et avis

Avis des internautes sur MBD-X8DT6-F (0 avis)

pixel_trans
Il n'y a actuellement aucun avis pour cet article, soyez le premier à donner le votre.
pixel_trans
pixel_trans
[Ajouter votre commentaire]
Retour en haut
Ce site utilise des cookies destinés à optimiser votre expérience sur ce site et à vous proposer des offres correspondant à vos centres d’intérêt. En naviguant sur ce site, vous consentez à l’utilisation de ces cookies.
J’ai compris