Que recherchez-vous ?

MBD-X8DTT-IBXF

Référence - oicp-mbd-x8dtt-ibxf
Note moyenne : 0 avis
455.00 € HT
Quantité 
+
-
Garantie :   Garantie : 1 an

Carte Mère format Propriétaire Dual Socket (LGA 1366) pour processeurs Intel® Xeon® 5600/5500 serie
Max 192GB ECC DDR3
VGA, 2 Gbe LAN, 6 SATA2, IPMI (LAN dédié), 4 USB 2.0

Demander un devis

MBD-X8DTT-IBXF
Notes et avis

Fonctionnalités


1. Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
2. Intel® 5500 (Tylersburg) Chipset
3. Up to 192GB** DDR3 1333/ 1066/  800MHz ECC Registered DIMM / 48GB Unbuffered DIMM
4. Intel® 82576 Dual-Port Gigabit Ethernet Controller
5. 1 (x16) PCI-E 2.0 slot
6. Integrated IPMI 2.0 with KVM and Dedicated LAN
7. Integrated Matrox G200eW Graphics
8. Mellanox ConnectX-2 DDR Infiniband 20Gbps Controller w/ QSFP connector
 
 

Description du produit


Physical Stats
Form Factor
Proprietary
Dimensions
16.64" x 6.5 " (42.26cm x 16.51cm)
 
Processor/Cache
CPU
Dual 1366-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
Intel® Xeon®Processor 5600 Series (Westmere)
Intel® Xeon®Processor 5500 Series (Nehalem-EP)
 
QPI
up to 6.4 GT/s
 
System Memory
Memory Capacity
12x 240-pin DIMM slots
Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
Memory Mirroring supported
 
Memory Type
1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

 

DIMM Sizes
1GB, 2GB, 4GB , 8GB** , 16GB**
 
Memory Voltage
1.5 V / 1.35 V
 
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Infiniband
Mellanox ConnectX-2 DDR Infiniband 20Gbps Controller
 
Chipset
Intel® 5520 (Tylersburg) chipset
ICH10R
 
SATA
Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
 
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Winbond® WPCM450 BMC
 
Network Controllers
Intel® 82576 Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT 3 support for fast, scaleable, and reliable networking
VMDq support for better performance of virtualization
1x Realtek RTL8201N PHY (dedicated IPMI)
 
Graphics
Matrox G200eW
 
Super I/O
Winbond W83527HG chip
 
Clock Generator
932S421 chip
 
Input / Output
Serial ATA
Six Serial ATA ports
Six SATA hard drives supported
 
LAN
2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port
 
USB
2 rear + 1 header (2 Ports)
4 total USB ports, 2.0 Compliant / 1.1 Compliant
 
VGA
1x VGA Port
 
Serial Port
1 Fast UART 16550 serial port
 
Infiniband
1 External QSFP Infiniband Connector
 
Chassis ( Optimized for X8DTT-IBXF)
1U Chassis
CSE-808T-1200B
CSE-808T-780B
CSE-809T-1200B
CSE-809T-780B
2U Chassis
CSE-827H-R1200B
CSE-827H-R1400B
CSE-827T-R1400B
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
 
Expansion Slots
PCI-Express
1 (x16) PCI-E 2.0 slot
 
System BIOS
BIOS Type
32Mb SPI Flash EEPROM with AMI® BIOS
 
BIOS Features
Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support
 
Management
Software
IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
SuperDoctor® III
Watch Dog
NMI
 
Power Configurations
ACPI Power Management
Main Switch Override Mechansim
Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
CPU Core 6-Phase-switching voltage regulator
 
FAN
Total of four 4-pin PWM fans
4x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control (4-pin fan only)
 
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 4x Fan Connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
 
LED
Power Fail / Overheat LED
Suspend-state Indicator LED
UID LED
 
Other Features
SDDC Support
 
Operating Environment
Environmental Spec.
Operating Temperature: 10° to 35° C (50° to 95°F)
Non-operating Temperature: -40° to 70° C (-40° to 158° F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)

 

Retour en haut
MBD-X8DTT-IBXF
Notes et avis

Avis des internautes sur MBD-X8DTT-IBXF (0 avis)

pixel_trans
Il n'y a actuellement aucun avis pour cet article, soyez le premier à donner le votre.
pixel_trans
pixel_trans
[Ajouter votre commentaire]
Retour en haut