Que recherchez-vous ?

Marques

Format Carte Mère

MBD-X8ST3-F

Référence - oicp-mbd-x8st3-f
Note moyenne : 0 avis
265.00€ HT
Quantité 
+
-
Garantie :   Garantie : 1 an

Carte Mère ATX Intel Core/Xeon (LGA 1366), jusqu'à 24GB DDR3 ECC 1333MHz, Dual Intel Gigabit LAN, 8-port SAS, 6x SATA (3Gbps), 3x PCI-E (x8), 1x PCI-E (x4), 2x PCI-32 bit, 8 USB, IPMI 2.0.

Demander un devis

MBD-X8ST3-F
Notes et avis

Fonctionnalités


1. Intel® Core™ i7 / i7 Extreme Edition, and Intel® Xeon® 5600/5500/3600/3500  series processors (QPI up to 6.4 GT/s)
2. Intel® X58 Express Chipset
3. Up to 24GB DDR3 1333/1066/800 ECC / non-ECC Un-Buffered DIMM
4. Intel® Dual 82574L Gigabit  Ethernet Controller
5. Broadcom 1068E 8-Port SAS Controller; RAID 0, 1, 10
6. 6x SATA (3.0Gbps) Ports RAID 0, 1, 5, 10
7. 3 (x8) PCI-Express 2.0 (1 in x16 slot), 1 (x4) PCI-Express (using x8 slot), 2x 32-bit PCI Slots
8. Integrated IPMI 2.0 with Dedicated LAN
9. 8x USB (2 rear, 2 on-board, 2 headers)

Description du produit


Physical Stats
Form Factor ATX
Dimensions 12" x 10 ", (30.5cm x 24.4cm)
 
Processor/Cache
CPU
LGA 1366 Socket
Intel® Core™ i7 990X, i7-980X, i7-975 and i7-965 Extreme Edition
Intel® Core™ i7 series
Intel® Xeon® 5600/5500 series
Intel® Xeon® 3600/3500 series
 
System Bus
QPI (up to 6.4 GT/s)
 
System Memory
Memory Capacity
Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory
Three Channel memory bus
6 DIMM slots
 
Memory Type
1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
 
DIMM Sizes
256MB, 512MB, 1GB, 2GB, 4GB
 
Memory Voltage
1.5 V
 
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
Intel® X58 Express chipset
ICH10R
 
SAS
Broadcom SAS1068E
RAID 0, 1, 10 support
(Optional: AOC-IButton68) RAID 5 support
 
SATA
Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
 
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Winbond® WPCM450 BMC
 
Network Controllers
2x Intel® 82574L Gigabit Ethernet Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
 
VGA
Matrox G200eW 16 MB DDR2
 
Super I/O
Winbond 83627DHG chip
 
Clock Generator
CK505
 
Input / Output
SAS
8 SAS / SATA ports
 
Serial ATA
6 SATA ports
6 SATA hard drives supported
 
Floppy
1 Floppy controller; 1.44 MB
 
LAN
2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port
 
USB
2x USB rear ports
2x USB on-board
2x USB internal headers (4 ports)
Total 8 USB 2.0 Compliant
 
VGA
1x VGA port
 
Keyboard / Mouse
PS/2 keyboard and mouse ports
 
Serial Port / Header
1x Fast UART 16550 serial port
1x internal header
 
 
Chassis ( Optimized for X8ST3-F )
2U Chassis
CSE-213A-R900LPB
CSE-216A-R900LPB
CSE-216E1-R900LPB
CSE-216E2-R900LPB
CSE-822T-400LPB
CSE-825MTQ-R700LPB
CSE-825TQ-560LPB
CSE-825TQ-R700LPB
CSE-826TQ-R800LPB
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards, a Revision K
chassis is recommended for most models.
 
Expansion Slots
PCI-Express
3 (x8) PCI-e 2.0 slots (1 using x16 slot)
1 (x4) PCI-e slot (using x8 slot)
PCI
2x 32-bit PCI slot
 
System BIOS
BIOS Type
32Mb SPI Flash EEPROM with AMI BIOS
 
BIOS Features
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
 
Management
Software
IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
SuperDoctor® III
Watch Dog
NMI
 
Power Configurations
ACPI / ACPM Power Management
Main Switch Override Mechanism
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode for AC power recovery
Internal/External modem ring-on
 
PC Health Monitoring
 
Voltage
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT,
Memory, Chipset Voltages.
6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
 
FAN
Total of five fan headers supporting up to 5 fans
Five 4-pin fan headers
5x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
 
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
 
LED
CPU / System Overheat LED
+5V Standby alert LED
 
Other Features
Chassis intrusion detection
Chassis intrusion header
 
Operating Environment
Environmental Spec.
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)

Retour en haut
MBD-X8ST3-F
Notes et avis

Avis des internautes sur MBD-X8ST3-F (0 avis)

Il n'y a actuellement aucun avis pour cet article, soyez le premier à donner le votre.
[Ajouter votre commentaire]
Retour en haut