Que recherchez-vous ?

MBD-X9DRi-F

Référence - oicp-mbd-x9dri-f
Note moyenne : 0 avis
729.00 € HT
Quantité 
+
-
Garantie :   Garantie : 1 an

Carte Mère format ATX étendue Dual LGA2011 Sockets pour processeurs Intel® Xeon E5-2600 & 2600V2
Max 1TB DDR3 ECC
2 Gbe LAN, IPMI
8 SATA2 & 2 SATA3
11 USB 2.0

Ajouter au panier

Demander un devis

MBD-X9DRi-F
Notes et avis

Fonctionnalités


1. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and E5-2600 v2 family†
2. Intel® C602 chipset; QPI up to 8.0GT/s
3. Up to 1TB ECC DDR3, up to 1866MHz; 16x DIMM slots
4. Expansion slots:
    3x PCI-E 3.0 x16 and 3x PCI-E 3.0 x8
5. Intel® i350 Dual port GbE LAN
6. 8x SATA2 and 2x SATA3 ports
7. Integrated IPMI 2.0 and KVM with Dedicated LAN
8. 11x USB 2.0 ports (4 rear, 6 via header + 1 Type A)

 

Description du produit


Physical Stats
Form Factor
Enhanced Extended ATX
Dimensions
12" x 13." (30.5cm x 33.2cm)
 
Processor/Cache
CPU
Intel® Xeon® processor E5-2600 and E5-2600 v2 family†  (up to 135W TDP **)
Dual Socket R (LGA 2011)
 
Cache
Up to 30MB
 
System Bus
QPI up to 8 GT/s
Note † BIOS version 3.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support
 
System Memory
Memory Capacity
16x 240-pin DDR3 DIMM slots
Up to 1TB DDR3 ECC LRDIMM
Up to 512GB DDR3 ECC RDIMM
Up to 128GB DDR3 ECC/non-ECC UDIMM
 
Memory Type
1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs
 
* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed
.
DIMM Sizes
32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM
 
Memory Voltage
1.5 V, 1.35 V
 
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
Intel® C602 chipset
 
AHCI SATA
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10
 
SCU SATA
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
 
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
 
Network Controllers
Intel® i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
 
Input / Output
AHCI SATA
2x SATA 3.0 ports (6Gbps)
4x SATA 2.0 ports (3Gbps)
 
SCU SATA
4x SATA 2.0 ports (3Gbps)
 
LAN
2 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
 
USB
11 USB 2.0 ports total
(4 rear + 6 via header + 1 Type A)
 
Video
1 VGA port
 
Serial Port / Header
2 Fast UART 16550 ports: 1 rear and 1 header
 
DOM
1 DOM (Disk on Module) power connector
 
TPM
1 TPM Header
 
Chassis (Optimized for X9DRi-F )
2U Chassis
CSE-825TQ-R740LPB
3U Chassis
CSE-835TQ-R920B
Tower / 4U Rackmount
CSE-745TQ-R920B
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards, 
Revision M chassis is recommended. 
Please use optional I/O shield MCP-260-00041-0N in Supermicro 1U chassis
 
SuperServer(s) with X9DRi-F
Model(s)
SYS-7047R-TRF
SYS-6027R-TRF
Expansion Slots
PCI-Express
3x PCI-E 3.0 x16 slots
3x PCI-E 3.0 x8 slots
 
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. 
See manual block diagram for details.)
 
 
System BIOS
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
 
BIOS Features
Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1
 
Management
Software
IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
SuperDoctor® III
Watch Dog
NMI
Optional IPMI 1.5 / 2.0
 
Power Configurations
ACPI / APM Power Management
Main Switch Override Mechanism
CPU Fan auto-off in sleep mode
Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, 
+5V Standby, VBAT, 4 Memory Voltages.
5+1 Phase-switching voltage regulator
 
FAN
8x 4-pin fan headers (up to 8 fans)
8x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
 
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
 
LED
CPU / System Overheat LED
 
Other Features
Chassis intrusion detection
Chassis intrusion header
SDDC Support
 
 
Operating Environment
Operating Temperature Range
10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
Retour en haut
MBD-X9DRi-F
Notes et avis

Avis des internautes sur MBD-X9DRi-F (0 avis)

pixel_trans
Il n'y a actuellement aucun avis pour cet article, soyez le premier à donner le votre.
pixel_trans
pixel_trans
[Ajouter votre commentaire]
Retour en haut