Advanced Search
See larger image

Form Factor M/B


Reference -oicp-mbd-x10sll+-f
Rating:0 opinion
349.00€ Exclu. VAT
Quantity : 
Warranty  Warranty 1 year

Micro ATX Motherboard, Intel (LGA 1150)
Max 32GB DDR3 ECC (1600MHz)
Dual Gbe
2 SATA (6Gbps), 4 SATA (3Gbps)
1 PCI-E 3.0 (x8) 1PCI-E 3.0 (x8) 1 PCI-E 2.0 (x4)
VGA, 2 USB 3.0, 6 USB 2.0
Integrated IPMI

Ask an estimate



1- Single socket H3 (LGA 1150) supports Intel® Xeon® E3-1200 v3/v4, 4th gen. Core i3, Pentium, Celeron processors
2- Intel® C222 Express PCH
3- Up to 32GB DDR3 ECC 1600MHz UDIMMs in 4 sockets
4- Dual Gigabit Ethernet LAN ports (1 Intel® i217LM & 1 Intel® i210AT)
5- 2 SATA (6Gbps), 4 SATA (3Gbps)
6- 1 PCI-E 3.0 x8 (in x16), 1 PCI-E 3.0 x8, and 1 PCI-E 2.0 x4 (in x8) slots
7- 2 USB 3.0 (1 Type-A + 1 via header)
6 USB 2.0 (4 rear + 2 via header)
8- Integrated IPMI 2.0 with KVM and Dedicated LAN
9- SATA DOM power connector support


Product description

Physical Stats
Form Factor µATX
Dimensions 9.6" x 9.6 ", (24.4cm x 24.4 cm)
Intel® 4th Generation Core™ i3 series, Intel® Celeron®, Intel® Pentium®v, Intel® Xeon® processor E3-1200 v3, Intel® Xeon® Processor E3-1200 v4 series.
Single Socket LGA 1150 supported
System Memory
Memory Capacity
Up to 32GB Unbuffered ECC UDIMM, DDR3-1600MHz, in 4 DIMM slots
4x 240-pin DDR3 DIMM sockets
Memory Type
1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
1GB, 2GB, 4GB, 8GB
Memory Voltage
1.35V, 1.5V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
Intel® C222 Express PCH
SATA3 (6 Gbps) ports; RAID 0,1
Intel® C222 controller for 4 SATA2 (3 Gbps) ports; RAID 0,1,5,10
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 with 10/100/1000M bps MAC
Network Controllers
Dual LAN with Intel® Ethernet Controller I210-ATSupports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output1 Realtek RTL8211E PHY (dedicated IPMI)
Aspeed AST2400 BMC
Input / Output
2 SATA3 (6Gbps) port
4 SATA2 (3Gbps) ports
2 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
6 USB 2.0 ports (4 rear + 2 headers),
2 USB 3.0 ports (1 header + 1 Type A) Type A
Video Output
1 VGA port
Serial Port / Header
2 COM Ports (1 rear, 1 header)
1 TPM Header
Expansion Slots
1 PCI-E 3.0 x8 (in x16 slot),
1 PCI-E 3.0 x8
1 PCI-E 2.0 x4 (in x8 slot),
System BIOS
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
ACPI 5.0
USB Keyboard support
IPMI2.0, NMI, SuperDoctor® III, Watchdog
Power Configurations
ACPI Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on
PC Health Monitoring
+12V, +3.3V, +5V, +5V standby, 5 Phase-switching voltage regulator
with auto-sense from 0.8375V-1.60V, Chipset Voltage, HT,
Memory, Monitors for CPU Cores, VBAT
5x 4-pin fan headers (up to 5 fans)
5 fans with tachometer status monitoring
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Status monitoring for on/off control
Status monitoring for speed control
Support 3-pin fans (w/o speed control)
Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
FC temperature sensing logic
CPU / System Overheat LED, +5V Standby alert LED
Other Features
Chassis intrusion detection, Chassis intrusion header
Operating Environment
Operating Temperature Range
0°C ~ 50°C (32°F ~ 122°F)
Non-Operating Temperature Range
-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
5% - 95% (non-condensing)

Back to top

Reviews about this MBD-X10SLL+-F (0 reviews)

There is no review for this item, add the first one.
[Add your review]
Back to top