Image de diaporama
Advanced Search
MBD-X10SLX-F
See larger image

Form Factor M/B

MBD-X10SLX-F

Reference -oicp-mbd-x10slx-f
Rating:0 opinion
Quantity : 
+
-
Warranty  Warranty 1 year

ATX Motherboard Intel(LGA 1150)
Max 32GB DDR3 non-ECC (1600MHz)
2 Gbe LAN
2 SATA 3, 4 SATA 2
PCI-E 3.0 (x8), PCI-E 2.0 (x4&x1), 4 PCI-X
VGA D-sub, 7 USB2, 2 USB3
2 COM ports, TPM
SATA DOM

Ask an estimate

MBD-X10SLX-F
Notice

Features


1. Single socket H3 (LGA 1150) supports Intel® Xeon® E3-1200 v3/v4 processors
2. Intel® C222 Express PCH
3. Up to 32GB DDR3 1600MHz ECC UDIMMs (4x DIMMs)
4. Dual Gigabit Ethernet LAN ports (with 2x Intel® i210 chipset)
5. 2x SATA (6Gbps), 4x SATA (3Gbps)
6. 1x PCI-E 3.0 x8, 1x PCI-E 2.0 x4 (in x8),
    1x PCI-E 2.0 x1, 4x PCI-X 64-bit slots
7. 2x USB 3.0 (1 Type-A + 1 via header)
    7x USB 2.0 (4 rear + 3 via headers)
8. Integrated IPMI 2.0 with KVM and Dedicated LAN
9. SATA DOM power connector support
10. VGA D-sub connector, TPM header

 

Product description


Physical Stats
Form Factor
ATX
Dimensions
12" x 9.6", (30.48cm x 24.4 cm)
 
Processor/Cache
CPU
Intel® Xeon® processor E3-1200 v3/v4 and 4th Gen Core i3, Pentium, Celeron processors (up to 95W TDP)
Single Socket H3 (LGA 1150)
 
System Memory
Memory Capacity
4x 240-pin DDR3 DIMM sockets
Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
 
Memory Type
1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
 
DIMM Sizes
8GB, 4GB, 2GB, 1GB
 
Memory Voltage
1.5V, 1.35V
 
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
Intel® C222 Express PCH
 
SATA
SATA3 (6Gbps) w/ RAID 0, 1
SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
 
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Aspeed AST2400 with 10/100/1000M bps MAC
 
Network Controllers
Intel® i210 Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8111E PHY (dedicated IPMI)
 
VGA
BMC integrated Aspeed AST2400
 
Input / Output
Serial ATA
2x SATA3 (6Gbps) ports
4x SATA2 (3Gbps) ports
 
LAN
2x Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
 
USB
2x USB 3.0 ports (1 Type-A, 1 via header)
7x USB 2.0 ports (4 rear, 3 via header)
 
VGA
1x VGA D-Sub Connector
 
Serial Port / Header
2x COM ports (1 rear, 1 header)
 
DOM
SATA DOM (Disk on Module) power connector support
 
TPM
1x TPM Header
 
Operating Environment
Operating Temperature Range
0°C ~ 60°C (32°F ~ 140°F)
Non-Operating Temperature Range
-20°C ~ 60°C (-4°F ~ 140°F)
Operating Relative Humidity Range
10% ~ 85% (non-condensing)
Non-Operating Relative Humidity Range
10% ~ 95% (non-condensing)
 
 
Chassis (Optimized for X10SLX-F )
Mid/Mini Tower Chassis:
SC732i-865B
SC732i-500B
SC733i-500B
SC733I-665B
SC733TQ-500B
SC733TQ-665B
4U / Tower Chassis:
SC842i-500B
SC842TQ-665B
SC842TQ-865B
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards,
Revision M chassis is recommended.
 
Expansion Slots
PCI-Express
1x PCI-E 3.0 x8 slot
1x PCI-E 2.0 x4 (in x8) slots
1x PCI-E 2.0 x1 slot
4x PCI-X 64-bit slots
 
System BIOS
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
 
BIOS Features
DMI (SMBIOS) 2.7
ACPI 5.0
USB Keyboard support
 
Management
Software
IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
SuperDoctor® III
Watch Dog
NMI
 
Power Configurations
ACPI / ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on
 
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +5V Standby, VBAT, HT,
Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
 
FAN
Total of four 4-pin fan headers supporting up to 4 fans
4x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
 
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
 
LED
CPU / System Overheat LED
+5V Standby alert LED
 
Other Features
Chassis intrusion detection
Chassis intrusion header
 
 

 


 

Back to top
MBD-X10SLX-F
Notice

Reviews about this MBD-X10SLX-F (0 reviews)

There is no review for this item, add the first one.
[Add your review]
Back to top