Advanced Search

MBD-X9DAE

Reference -oicp-mbd-x9dae
Rating:0 opinion
769.00 € Exclu. VAT
Quantity : 
+
-
Warranty  Warranty 1 year

Extended ATX Motherboard Dual LGA2011 Sockets for Intel® Xeon E5-2600 & 2600v2 family processors
Max 1TB DDR3 ECC
2 Gbe LAN
6 SATA2 & 2 SATA3
4 USB 3.0 & 7 USB 2.0

Add to cart

Ask an estimate

MBD-X9DAE
Notice

Features


1. NVIDIA Geforce SLI Enabled
2. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and E5-2600 v2 family
3. Intel® C602 chipset; QPI up to 8.0GT/s
4. Up to 1TB ECC DDR3, up to 1866MHz; 16x DIMM slots
5. Expansion slots: 3 PCI-E 3.0 x16,
    2 PCI-E 3.0 x8, 1 PCI-E 3.0 x4 (in x8);
    Supports 2-way Geforce SLI
6. Intel® i350 Dual port GbE LAN
7. 6x SATA2 and 2x SATA3 ports
8. 4x USB 3.0 and 7x USB 2.0 ports

 

Product description


Physical Stats
Form Factor
Enhanced Extended ATX
Dimensions
12" x 13." (30.5cm x 33.2cm)
 
Processor/Cache
CPU
Intel® Xeon® processor E5-2600 and E5-2600 v2 family†  (up to 150W TDP **)
Dual Socket R (LGA 2011)
 
Cache
Up to 30MB
 
System Bus
QPI up to 8 GT/s
Note † BIOS version 3.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support
 
System Memory
Memory Capacity
16x 240-pin DDR3 DIMM slots
Up to 1TB DDR3 ECC LRDIMM
Up to 512GB DDR3 ECC RDIMM
Up to 128GB DDR3 ECC/non-ECC UDIMM
 
Memory Type
1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs
 
* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed
.
DIMM Sizes
32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM
 
Memory Voltage
1.5 V, 1.35 V
 
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
Intel® C602 chipset
 
AHCI SATA
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10
 
SCU SATA
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
 
Network Controllers
Intel® i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
 
Audio
RealTek ALC889 7.1 High Definition Audio with S/PDIF header
 
Input / Output
AHCI SATA
2x SATA 3.0 ports (6Gbps)
4x SATA 2.0 ports (3Gbps)
 
SCU SATA
2x SATA 2.0 ports (3Gbps)
 
LAN
2 RJ45 Gigabit Ethernet LAN ports
 
USB
4 USB 3.0 ports (Renesas uPD720200A; 2 rear + 2 via header)
7 USB 2.0 ports
  (4 rear + 2 via header + 1 Type A)
 
Audio
Line-in / Line-out / Microphone Ports
 
Keyboard/Mouse
PS/2 Keyboard/Mouse port
 
Serial Port / Header
1 Fast UART 16550 port
 
IEEE 1394a
2 Headers
 
DOM
1 DOM (Disk on Module) power connector
 
TPM
1 TPM Header
 
Chassis (Optimized for X9DAE )
Mid-Tower
CSE-732D4F-903B
Tower / 4U Rackmount
CSE-743TQ-1200B-SQ
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards, 
Revision M chassis is recommended. 
 
Expansion Slots
PCI-Express
3 (x16) PCI-E 3.0 slots
2 (x8) PCI-E 3.0 slots
1 (x4) PCI-E 3.0 slot (in x8)
Supports 2-way Geforce SLI
 
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. 
See manual block diagram for details.)
 
System BIOS
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
 
BIOS Features
Plug and Play (PnP)
APM 1.2
DMI 2.3
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1
 
Management
Software
SuperDoctor® III
Watch Dog
NMI
 
Power Configurations
ACPI / APM Power Management
Main Switch Override Mechanism
CPU Fan auto-off in sleep mode
Power-on mode for AC power recovery
Suspend to RAM (STR)
 
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby,
+5V Standby, VBAT, Memory, Voltages.
6+1 Phase-switching voltage regulator
 
FAN
8x 4-pin fan headers (up to 8 fans)
8x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
 
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
 
LED
CPU / System Overheat LED
 
Other Features
Chassis intrusion detection
Chassis intrusion header
SDDC Support
RoHS
 
 
Operating Environment
Operating Temperature Range
10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
5% - 95% (non-condensing)
Back to top
MBD-X9DAE
Notice

Reviews about this MBD-X9DAE (0 reviews)

pixel_trans
There is no review for this item, add the first one.
pixel_trans
pixel_trans
[Add your review]
Back to top