Features
1- Intel® Pentium® 4 processor, Intel® Celeron® processor, or Intel® Pentium® -M processor, up to 3.06 GHz, with Hyper-Threading Technology
2- Intel® 845GV Chipset, supporting 400/533 MHz FSB, 266 MHz DDR SDRAM
3- DDR 266 memory, up to 2GB, DIMM Socket x 2
4- Built-in fast Ethernet LAN port x 3
Product Description
CPU support
Socket 478 for Intel® Pentium® 4 processor, Intel® Celeron® processor, or Intel® Pentium® -M processor, up to 3.06 GHz, with Hyper-Threading Technology
400/533 MHz FSB
512K L2 cache on-die
Memory
On-board two 184-pin DIMM socket support up to 2GB PC2100/PC1600 DDR ECC/Non Ecc memory
BIOS
Award system BIOS
Plug & Play
ACPI 1.0b compliant
4M bits flash ROM
Chipset
Intel® 845GV
Intel® 82801DBx I/O controller Hub (ICH4)
Firmware Hub (FWH) 4M bits flash ROM x 1
On-board LAN
Intel® 82551 QM x 2 + ICH4 integrated LAN
Compliant with PCI V2.1/V2.2
On-board VGA
Intel® 82845GV chipset integrated with graphics controller
Hardware motion compensation assist for software MPEG/DVD decode
64MB VGA share memory
AGP 4X interface (1.5V)
Fully PC98 and PC99 compliant
On-board LVDS transmitters
I/O ports
VGA: 15-pin CRT connector x 1 / 2.0mm box header 8 x 2 CRT connector / RHS FD 14-pin connector for LVDS panel output
LAN: RJ45 with LED connector x 3
USB port x 2, JST 2.0mm 6 pin Connector x 1
SMBus 2.0 controller: 2.0mm 4-pin pin-header connector x 1
Audio: on-board AC’97 2.2 interface connector, 10-pin header x 1
HDD: Ultra ATA support, 40-pin connector x 1, Compact Flash connector x 1
Serial port: 16C550 UARTs, 10-pin box-header x 1, D-Sub connector x 1
Parallel port: Bi-directional, EPP/ECP support, 26-pin connector x 1
FDD: Slim type connector x 1
PS/2 KB/Mouse: 6-pin mini-DIN connector x 1
External KB/Mouse: 8-pin connector x 1
On-board buzzer x 1
GPIO (4 bit TTL input/output with Power & GND), 10-pin pin-header connector x 1
ATX Power: 12V power 4-pin connector x 1, 20-pin connector x 1
System Monitor
Derived from Super I/O ITE 8712F-A to support system monitor
Monitor voltage, fan speed, and temperature
Real time clock
On-chip RTC with Lithiom battery for data retention
Power Source
ATX Power Connector x 1
12V Power 4 pin connector x 1
Watchdog Timer
Watchdog timeout can be programmable by software from 1 ~ 128 seconds
Dimensions
203mm (L) x 146mm (W)
Power Requirements
+5V / +12V / +3.3V / +3.3VSB / 5VSB
Note: Make sure that your ATX 12V power supply can provide at least 8 mA on the 12V lead and at least 1 mA on the +5 volt standby lead (+5VSB).
The system may become unstable and may experience difficulty powering up if the power supply in inadequate.
Environment
Operating temperatures: 0oC to 60oC
Storage temperatures: -20oC to 80oC
Relative humidity: 10% to 90% (Non-condensing)
Certification
CE
FCC
