Image de diaporama
Advanced Search

ROBO-6710VLA

Reference -oicp-robo-6710vla
Rating:0 opinion
429.00€ Exclu. VAT
Quantity : 
+
-
Warranty  Warranty 1 year

Half size PCI CPU card supports Intel® Pentium®M / Celeron®M processor in mPGA479 package
Max 1GB DDR 333/266 SDRAM
1 LAN
2 Serial Ports
VGA/LVDS, Audio and 4 USB 2.0.

Ask an estimate

ROBO-6710VLA
Notice

Features


1- Support Intel® low power consumption 400MHz FSB Pentium® M/Celeron® M processor for thermal/power limited applications
2- Fanless solution with on-board Intel® ULVCeleron® M 600MHz processor (ROBO-6730VLA)
3- Support dual display function via VGA and LVDS output
4- Perfect engine of slim computer with LVDS interface LCD panel
5- On-board Intel® 10 BASE-T/100BASE-TX Fast Ethernet
6- One SODIMM socket at the rear that supports up to 1GB system memory
7- One Type II Compact Flash at the rear that supports up to 1GB f ash disk for installation OS without hard drive
8- Audio Codec ’97 (AC’97) 2.2 for a high quality audio architecture
9- PCI bus interface for higher f exibility and expandability

 
 

Product Description


CPU 

CPU & Package: Intel® Pentium® M/Celeron® M processor (ROBO-6710VLA) /Intel® ULV Celeron® M 600MHz processor (ROBO-6730VLA)
FSB: 400MHz


Chipset Intel® 852GM and ICH4


Memory Up to 1GB DDR 200/266/333 SDRAM on one 200-pin SODIMM socket


BIOS Award BIOS


Display

- Intel® 852GM mobile optimized graphics controller
- Dynamical allocates 32/64MB system memory for display
- Support VGA (DB15 on bracket) and LVDS interface
- Support TV output by project based


Ethernet

- 10 BASE-T/100BASE-TX Ethernet
- IEEE 802.3u auto-negotiation support
- One RJ-45 connector on bracket


Audio AC ’97 2.2 audio


EIDE

- Support dual EIDE channel with Ultra DMA 100/66/33
- One 44-pin and one 40-pin connector


Solid State Disk

- One Type II CF socket
- On secondary EIDE channel
- Bootable for no drives primary channel


I/O

- On-board Winbond W83627HF super I/O
- Up to two floppy disk drive
- Two serial (one on bracket; one RS-232/422/485 selectable), one parallel, one IrDA and four USB ports (two on bracket that dedicated for keyboard/mouse


ACPI Function

- ATX function with 4-pin header connect to backplane
- Modem-Ring-On and Wake-On-LAN


Hardware Monitoring System monitor (fan, temperature, voltage)


Watchdog Timer

- Programmable via software from 0.5 sec. to 254.5 min.


Power Requirement Typical: +5V@2.0A; +12V@1.5A


Mechanical

Dimension: 185(L) x 122(W) mm; 7.3"(L) x 4.8" (W)

PCB: 8-layer


Environment

Operating Temperature: 0 to 55°C
Storage Temperature: -20 to 75°C
Relative Humidity: 5% to 95%, non-condensing


Approval CE, FCC Class B

 

 

DATASHEET


 

Back to top
ROBO-6710VLA
Notice

Reviews about this ROBO-6710VLA (0 reviews)

There is no review for this item, add the first one.
[Add your review]
Back to top