Advanced Search
MBD-P4SCA
See larger image

Form Factor M/B

MBD-P4SCA

Reference -oicp-mbd-p4sca
Rating:0 opinion
Quantity : 
+
-
Warranty  Warranty 1 year

ATX Motherboard Intel Pentium 4 (3.4GHz max) & Celeron (2.4GHz max), up to 4GB DDR, Intel Gigabit LAN, 2 SATA, 3 ISA, 4 PCI, 8 USB

Ask an estimate

MBD-P4SCA
Notice

Features


1. Intel® Pentium® 4 Support up to 3.4 GHz (Extreme Edition), Celeron® up to 2.4 GHz
2. Intel® E7210 (Canterwood ES) Chipset
3. Up to 4GB DDR 400/333/266 SDRAM
4. 1 x Intel® 82541 Gigabit Ethernet Controller
5. Serial ATA Controller on-chip (Intel® ICH5R)
6. 3 x 16-bit ISA (one shared), 4 x 32-bit 33MHz PCI (5V) slots
7. ATI RageXL 8MB PCI Graphic Controller
 

Product description


Physical Stats
Form Factor ATX
Dimensions 12" x 9.5", (30,5cm x 24,13 cm)
 
Processor/Cache
CPU
Single mPGA478 ZIF Sockets
Supports an Intel® Pentium® 4 processor with 2MB of integrated Advanced Transfer Cache up to 3.4GHz (Extreme Edition)
Supports an Intel® Celeron® processor with 128KB of integrated Advanced Transfer Cache up to 2.4GHz
Hyper-threading enabled
 
System Bus 800 / 533 / 400MHz system bus
 
System Memory
Memory Capacity
Four 184-pin DIMM sockets
Supports up to 4 GB of DDR400/333/266 memory
Dual channel memory bus
Memory must be populated in pairs
 
Memory Type DDR400/333/266 (ECC or non-ECC) unbuffered SDRAM, 184-pin gold-plated DIMMs
 
DIMM Sizes  256 MB, 512 MB, 1 GB
 
Memory Voltage 2.5 V only
 
On-Board Devices
Chipset
Intel® E7210 (Canterwood ES) chipset
MCH + 6300ESB + FWH + ISA Bridge
 
Serial ATA
SATA Controller on-chip (Intel® ICH5R)
Dual Serial ATA ports
RAID 0, 1 Supported *
 
Network Controllers
Single Intel® 82541 Gigabit Ethernet
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
 
Graphics ATI Rage XL SVGA PCI video controller with 8 MB of video memory
 
Input / Output
PCI Expansion
4x 32-bit 33MHz PCI (5V) slots
 
ISA Expansion
3x 16-bit ISA slots (1 shared with PCI slot)
 
IDE
Dual EIDE channels support up to four UDMA IDE devices
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
 
USB
Up to 8 USB ports
 
Infrared
1 Infrared port header
 
Serial Ports
2 Fast UART 16550 serial ports
 
Parallel Port
1 ECP / EEP Parallel Port
 
Floppy
1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
 
Keyboard / Mouse
PS/2 keyboard and mouse ports
 
Chassis ( Optimized for P4SCA )
Rackmount Tower / 4U
SC742i-300
 
Important Note To ensure system stability, a 300W (minimum) ATX power supply
[4-pin +12V AND (20 or 24-pin)] is required.
 
System BIOS
Bios Type
4Mb Flash EEPROM with AwardBIOS®
 
BIOS Features
Plug and Play (PnP)
APM 1.2
DMI 2.3 support
PCI 2.3
ACPI 1.0
BIOS rescue hot keys
Hardware BIOS virus protection
USB Keyboard support
 
Management
Software
SuperDoctor® III
Watch Dog
 
Power Configurations
ACPI/APM Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Suspend to RAM (STR)
Power-on mode control for AC power loss recovery
Internal/External modem remote ring-on
 
PC Health Monitoring
Voltage
Monitors for CPU Cores, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT
CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 0.85V-1.65V
Adjustable CPU clock frequency ratio settings (via BIOS)
 
FAN
Total of four 3-pin fan headers
3x fans with tachometer monitoring
Status monitor with firmware/software on/off control
 
Temperature
Monitoring for CPU, chassis, environment
CPU thermal trip support
 
LED
CPU Overheat LED
System Overheat LED
+5V standby alert LED
Suspend-state indicator LED
 
Other Features
Chassis intrusion detection
Chassis intrusion header
 

* - Driver Support for Windows 2000, XP, and 2003 only

Back to top
MBD-P4SCA
Notice

Reviews about this MBD-P4SCA (0 reviews)

There is no review for this item, add the first one.
[Add your review]
Back to top