Image de diaporama
Advanced Search

MBD-X7DVL-i

Reference -oicp-mbd-x7dvl-i
Rating:0 opinion
749.00€ Exclu. VAT
Quantity : 
+
-
Warranty  Warranty 1 year

ATX Motherboard Dual 771-pin LGA Sockets for Intel® Quad & Dual Core 64-bit Xeon processors, up-to 24GB DDR2, 2 Gbe LAN, 6 SATA-II, 6 USB 2.0, IPMI 2.0, VGA

Ask an estimate

MBD-X7DVL-i
Notice

Features


1. Dual Intel® LV 64-bit Xeon® Quad-Core or Dual-Core, with 667/1066/1333 MHz FSB
2. Intel® 5000V (Blackford VS) Chipset
3. Up to 24GB DDR2 667 & 533 SDRAM Fully Buffered DIMM (FB-DIMM)
4. Intel® (ESB2/Gilgal) 82563EB  Dual-port Gigabit Ethernet Controller
5. 6x SATA2 3.0Gbps Ports via ESB2 Controller
6. 1 Universal Slot Supporting:
    1 (x8) PCI-Express OR
    1x 64-bit 133MHz PCI-X,
    1x 64-bit 133MHz PCI-X,
    1x 32-bit 33MHz PCI
7. XGI Z7 On-board Graphics
8. IPMI 2.0 (SIMLC) Slot
 

Product description


Physical Stats
Form Factor
ATX
Dimensions
10" x 12" (25.4cm x 30.5cm)
 
Processor/Cache
CPU
Dual 771-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same
type below:
Quad-Core Intel® Xeon®Processor 5400/5300 sequence (Harpertown/Clovertown processor)
up to 3.16 GHz
Dual-Core Intel® Xeon®Processor 5200/5100/5000 sequence (Wolfdale/Woodcrest/Dempsey processor)
up to 3.40 GHz
 
System Bus
1333 / 1066 / 667 MHz system bus
Operating System Software
Supports 64-bit Operating Systems
Supports 32-bit Operating Systems
 
System Memory
Memory Capacity
Six 240-pin DIMM sockets
Supports up to 24 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
No Memory Mirroring support
 
Memory Type
667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
 
DIMM Sizes
256 MB, 512 MB, 1GB, 2GB, 4GB
 
Memory Voltage
1.8V only
1.5V(AMB)
 
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
Intel® 5000V (Blackford VS) chipset
MCH + ESB2
 
SATA
Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows Only)
RAID 0, 1, 10 support (Linux)
 
IPMI
Support for Intelligent Platform Management Interface v.2.0
200-pin IPMI slot
(Optional: AOC-SIMLC)
NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot
 
Network Controllers
Two Intel® (ESB2/Gilgal) 82563EB Single-Port Gigabit Ethernet Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
 
Graphics
XGI Volari™ Z7 PCI-E Graphics Processor
 
Super I/O
Winbond 83627HF chip
 
Input / Output
Serial ATA
Six Serial ATA ports
Six SATA hard drives supported
 
IDE
Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S)
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
 
Floppy
1 Floppy controller; 1.44 MB Support
 
LAN
2x RJ45 LAN ports
 
USB
2x USB rear ports
2x USB internal headers for up to 4-ports
Total 6 USB 2.0 Compliant / 1.1 Compliant
 
VGA
1x VGA Port
 
Keyboard / Mouse
PS/2 keyboard and mouse ports
 
Serial Port / Header
1 Fast UART 16550 serial port
1 Fast UART 16550 serial header
 
Parallel Port
1 Header for ECP / EEP parallel port
 
Chassis ( Optimized for X7DVL-i )
1U Chassis
CSE-512F-520B
CSE-512F-520LB
CSE-811i-520
CSE-811TQ-520B
2U Chassis
CSE-825MTQ-R700LPB
Tower / 4U Rackmount
CSE-743i-645
CSE-743i-650
CSE-743i-R760
CSE-743T-645
CSE-743T-650
CSE-743T-R760
CSE-743TQ-R760
Important Chassis Notes
To ensure system stability, a 500W (minimum) ATX power supply
[8-pin (+12V) and 24-pin are required]
 
Expansion Slots
Universal Slot
1x (x8) PCI-e slot OR
1x 64-bit 133MHz PCI-X Slot
PCI-X
1x 64-bit 133MHz PCI-X slot
PCI
1x 32-bit 33MHz PCI (5V) slots
 
System BIOS
BIOS Type
8Mb Flash EEPROM with Phoenix® BIOS
 
BIOS Features
Plug and Play (PnP)
SMBIOS 2.3
DMI 2.3
PCI 2.2
ACPI 1.0
BIOS rescue hot keys
USB Keyboard support
Hardware BIOS Virus protection
 
Management
Software
Optional IPMI (Intelligent Platform Management Interface) 2.0
SuperDoctor® III
Watch Dog
NMI
 
Power Configurations
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
Internal / External modem remote ring-on
 
PC Health Monitoring
Voltage
Monitors for CPU Cores, +3.3V, +5V, ±12V
4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
Adjustable CPU Clock Frequency Ratio
 
FAN
Total of six proprietary 4-pin fan headers supporting up to 6 fans
6x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
3-pin fan support
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
 
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 6x fan connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
 
LED
CPU / System Overheat LED
Supsend-State Indicator LED
+5V Standby Alert LED
 
Other Features
Chassis intrusion detection
Chassis intrusion header
SDDC Support
 
Operating Environment
Environmental Spec.
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
 
Regulatory
FCC
Passed to meet FCC standard requirement

 

Back to top
MBD-X7DVL-i
Notice

Reviews about this MBD-X7DVL-i (0 reviews)

There is no review for this item, add the first one.
[Add your review]
Back to top