Form Factor
ATX
Dimensions
12" x 9.6", (30.5cm x 24.4cm), 6 layers PCB
Processor/Cache
CPU
Single LGA775 ZIF Socket
Supports a Quad-Core Intel® Xeon® 3200 series processor
Supports a Dual-Core Intel® Xeon® 3000 series processor
Supports a Quad-Core Intel® Core™2 Extreme series processor
Supports an Intel® Core™2 Quad series processor
Supports an Intel® Core™2 Duo series processor
Supports an Intel® Pentium® processor E2000 series
Supports a Dual-Core Intel® Pentium® D processor
Supports an Intel® Pentium® Extreme Edition processor
Supports an Intel® Pentium® 4 processor
Supports an Intel® Celeron® processor E1000 series
Supports an Intel® Celeron® processor 400 series
NOTE: This board DOES NOT support Q9000, E8000, E7000, E5000 series or 45nm processor
System Bus
1066 / 800 / 533 MHz system bus
System Memory
Memory Capacity
Four 240-pin DIMM sockets
Supports up to 8 GB of memory (Single / Dual Channel)
Memory Type
DDR2 667/533MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
DIMM Sizes
256 MB, 512 MB, 1 GB, 2GB
Memory Voltage
1.8V only
On-Board Devices
Chipset
Intel 3010 (Mukilteo-2P) chipset
ICH7R + PXH + Intel® 82573V + Intel® 82573L
Serial ATA
Intel® ICH7R SATA2 (3 Gbps) controller built-in
Intel:
RAID 0, 1, 5, 10 support (Windows Only)
Adaptec:
RAID 0 (Two, three, four drives only)
RAID 1 (Two hard drives only)
SCSI
Adaptec AIC-7901 Single-channel U320 SCSI Controller
HostRAID 0, 1, 10 Supported
SCSI ZCR
Support for Zero-Channel RAID
Optional: (Card NOT included)
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
Supermicro Intelligement Management
(Optional: AOC-SIM1U+)
NOTE: Must use dedicated LAN for IPMI function
Network Controllers
2x Single-port Gigabit PCI-Express Ethernet Controllers Intel® 82573V
Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
VGA
On-board ATI ES1000 (16MB) graphics
Super I/O
Winbond W83627HG chip
Clock Generator
CK410
Input / Output
Serial ATA
Four Serial ATA ports (3 Gbps performance)
Four SATA hard drives supported
IDE
One EIDE channel supports up to two UDMA IDE devices
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
1 Floppy controller; 1.44 MB
LAN
2x RJ45 LAN ports
USB
Up to 4x USB 2.0 / 1.1 compliant ports
2 rear ports
1 internal header for 2 USB 2.0/1.1 ports
VGA
1x VGA port
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Ports
1x Fast UART 16550 serial port
1x internal header
