Que recherchez-vous ?

MBD-X7DWU

Référence - oicp-mbd-x7dwu
Note moyenne : 0 avis
Quantité 
+
-
Garantie :   Garantie : 1 an

Carte Mère format Propriétaire Dual 771-pin LGA Sockets pour processeurs Intel® Quad & Dual Core 64-bit Xeon
Max 64GB DDR2
2 Gbe LAN
6 SATA-II, IPMI, 5 USB 2.0

Demander un devis

MBD-X7DWU
Notes et avis

Fonctionnalités


1. Dual Intel® 64-bit Xeon® Quad-Core or Dual-Core, with 1600 / 1333 / 1066 MHz FSB
2. Intel® 5400 (Seaburg) Chipset
3. Up to 64GB DDR2 800 / 667 / 533 SDRAM Fully Buffered DIMM  (FB-DIMM) 1.8V or 1.5V supported
4. Intel® 82575EB Dual-port Gigabit Ethernet Controller w/ IOAT
5. 6x SATA 3.0Gbps Ports via ESB2 Controller
6. Left Side 
     1 (x8) PCI-Express (2.0) + 1 UIO or
     1 (x16) PCI-Express (2.0)
    Right Side 
     1 (x8) PCI-Express (2.0)
    For 2U configuration, Please go to
    UIO Riser Cards page
7. ATI ES1000 Graphics with 32MB video memory
8. IPMI 2.0 (SIMSO) slot
 

Description du produit


Form Factor
Proprietary
Dimensions
13.05" x 12.075" (33.2cm x 30.67cm)
 
Processor/Cache
CPU
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
Quad-Core Intel® Xeon®Processor 5400/5300LV sequence (Harpertown /Clovertown processor) up to 3.20 GHz
Dual-Core Intel® Xeon®Processor 5200/5100LV sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
 
System Bus
1600 / 1333 / 1066 MHz system bus
 
System Memory
Memory Capacity
Eight 240-pin DIMM sockets
Supports up to 64 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
Memory Sparing supported
 
Memory Type
800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
 
DIMM Sizes
256MB, 512MB, 1GB, 2GB, 4GB, 8GB**
 
Memory Voltage
1.8 V or 1.5 V
 
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
Intel® 5400 (Seaburg) chipset
MCH + ESB2
 
SATA
Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux)
 
IPMI
Support for Intelligent Platform Management Interface v.2.0 / 1.5 200-pin IPMI slot (SIMSO(+))
(Optional: AOC-SIMSO(+))
For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
 
Network Controllers
Intel® 82575EB Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking
 
Graphics
ATI ES1000 controller with 32 MB of video memory
 
Super I/O
Winbond 83627HF chip
 
Clock Generator
ICS 401 chip
 
Input / Output
Serial ATA
Six Serial ATA ports
Six SATA hard drives supported
 
IDE
Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
Compact Flash (40-pin connector, IDE 1, single channel) slot
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
 
Floppy
1 Floppy controller; 1.44 MB
 
LAN
2x RJ45 LAN ports
 
USB
2x USB rear ports
3x USB internal headers
Total 5 USB 2.0 Compliant / 1.1 Compliant
 
VGA
1x VGA Port
 
Keyboard / Mouse
PS/2 keyboard and mouse ports
 
Serial Port / Header
1 Fast UART 16550 serial port
1 Fast UART 16550 serial header
 
Chassis ( Optimized for X7DWU )
1U Chassis
CSE-815TQ-R650U
CSE-815S-560U
CSE-812L-520U
2U Chassis
CSE-823MTQ-R700U
CSE-825MTQ-R700U
CSE-825TQ-R700U
Important Chassis Notes
To ensure system stability, a 550W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 20-pin are required]
 
Expansion Slots
PCI-Express / PCI-X / UIO
Left Side
1 (x8) PCI-Express (2.0) + 1 UIO slots or
1 (x16) PCI-Express (2.0)
 
Right Side
1 (x8) PCI-Express (2.0)
 
For 2U configuration, Please go to UIO Riser Cards page
 
System BIOS
BIOS Type
16Mb Flash EEPROM with Phoenix® BIOS
 
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
 
Management
Software
Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0
SuperDoctor® III
Watch Dog
NMI
 
Power Configurations
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
Internal / External modem ring-on
 
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT,
HT, Memory, Chipset Voltages.
5 Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
 
FAN
Total of eight 4-pin fan headers supporting up to 8 fans
8x fans with tachometer status monitoring
Status monitor for speed control
Support 3-pin fans (w/o speed control)
Pulse Width Modulated (PWM) fan connectors
 
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x fan connectors
PC temperture sensing logic
Thermal Monitor 2 (TM2) support
PECI
 
LED
CPU / System Overheat LED
UID / Remote UID
 
Other Features
Chassis intrusion detection
Chassis intrusion header
SDDC Support
 
Operating Environment
Environmental Spec.
Operating Temperature: 10° to 35°C (50° to 95°F)
Non-operating Temperature: -40° to 70°C (-40° to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)

 

Retour en haut
MBD-X7DWU
Notes et avis

Avis des internautes sur MBD-X7DWU (0 avis)

Il n'y a actuellement aucun avis pour cet article, soyez le premier à donner le votre.
[Ajouter votre commentaire]
Retour en haut