Fonctionnalités

• Relay output Channel
• Optically isolated digital input channels
• AC/DC signal input ; AC signal input with filter
• Connector pin assignment is compatible to 725 series
• Power Requirements : 200 mA @ +5 V (max.) ; 260 mA @ +12 V (max.)
• LED indicator for each relay output state

Spécifications

Digital Input
Isolation Voltage 5000 Vrms (Channel-Channel & Channel-Ground)
Channels 16
Compatibility Non-polarized OPTO-isolated
Input Voltage Logic 0: 0 ~ 1 VAC/VDC
Logic 1: 5 ~ 24 VAC/VDC
Input Impedance 1.2 KΩ, 0.5 W
Response Speed With filter : 0.05 kHz
Without filter : 0.045 MHz

Relay Output
Channels 16
Relay Type 8 SPDT / 8 SPST
Contact Rating 0.3 A @ 120 VAAC/VDC
1 A @ 30 VDC
Operate Time 5 ms (typical)
Release Time 5 ms (typical)
Insulation Resistance 100 MΩ
Life Mechanical: 100,000 ops. (min.)
Electrical: 100,000 at 1 A @ 30 V, resistive

General
Bus Type ISA
I/O Connector Female DB37 x 1
40-pin box header x 1
Dimensions (L x W x D) 175mm x 121 mm x 22 mm
Power Consumption 200 mA @ +5 V (max.)
260 mA @ +12 V (max.)
Operating Temperature 0 ~ 60 °C
Storage Temperature -20 ~ 70 °C
Humidity 5 ~ 85% RH, non-condensing