Advanced Search
» » » » KIT X7SBL-LN2 - Core 2 Quad 2.66GHz (Q8400) - 4GB DDR2 800MHz
KIT X7SBL-LN2 - Core 2 Quad 2.66GHz (Q8400) - 4GB DDR2 800MHz
See larger image

KIT X7SBL-LN2 - Core 2 Quad 2.66GHz (Q8400) - 4GB DDR2 800MHz

Reference -oicp-kit-x7sbl-ln2
Rating:0 opinion
949.00€ Exclu. VAT
Quantity : 
Warranty  Warranty 1 year

M/B: X7SBL-LN2 micro ATX form with VGA, 2x GBe LAN, SATA2, PCI-e (x8,x4), 2x PCI, 7 USB
CPU: Intel Q8400 Core 2 Quad 2.66GHZ, FSB 1333MHz
Memory: 2x 2Go DDR2 800MHz

Add to cart
Ask an estimate
Get a discount depending on the quantity ordered :
A partir de
595.00€ Exclu. VAT

KIT X7SBL-LN2 - Core 2 Quad 2.66GHz (Q8400) - 4GB DDR2 800MHz


1. Intel® Xeon® 3000 Sequence and Core™ 2 Quad / Duo Series in LGA775 Package (FSB 1333/1066/800 MHz)
2. Intel® 3200 + ICH9R Chipset
3. Up to 8GB unbuffered ECC / non-ECC DDR2 800/667 SDRAM
4. 1x Intel® 82573V PCI-E Gigabit LAN
    1x Intel® 82573L PCI-E Gigabit LAN
5. Built-in SATA ICH9R Controller 6x SATA (3 Gbps) Drive with RAID 0, 1, 5, 10 Support
6. 1 (x8) PCI-Express,
    1 (x4) PCI-Express (using x8 slot),
    2 32 bit PCI slots
7. On board XGI Volari Z9S 32MB Graphics
8. IPMI 2.0 Support

Product description

Physical Stats
Form Factor
MicroATX (uATX)
9.6" width x 9.6 " length , (24.4cm x 24.4cm), 6 layers
Single LGA775 ZIF Socket
Supports Quad-Core Intel® Xeon® X3300/X3200 series
Supports Dual-Core Intel® Xeon® E3100/3000 series
Supports Intel® Xeon® processor L3360 and L3110 series
Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series
Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
Supports Intel® Pentium® E5000/E2000 series
Supports Intel® Celeron® E1000 and 400 series
NOTE: Intel Xeon processor L3014 requires an LGA771 socket and is not supported.
System Bus
1333 / 1066 / 800 MHz system bus
System Memory
Memory Capacity
Four 240-pin DIMM sockets
Supports up to 8 GB of unbuffered ECC / non-ECC DDR2 800/667MHz memory (Dual Channel)
Memory Type
DDR2 800/667MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
DIMM Sizes
256 MB, 512 MB, 1 GB, 2GB
Memory Voltage
1.8V only
On-Board Devices
Intel® 3200 chipset
ICH9R chipset
Serial ATA
Intel® ICH9R SATA2 (3 Gbps) controller built-in
RAID 0, 1, 5, 10 support (Windows Only)
RAID 0, 1, 10 support (Linux)
Support for 1U Intelligent Platform Management Interface v.2.0 / 1.5
(Optional: AOC-SIMLC-HTC)
Network Controllers
1x Intel® 82573V Gigabit PCI-Express Ethernet
1x Intel® 82573L Gigabit PCI-Express Ethernet
Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45 output
On-board XGI Volari Z9S 32MB graphics
Super I/O
Winbond 83627HG chip
Clock Generator
Input / Output
Serial ATA
Six Serial ATA ports (3 Gbps performance)
Six SATA hard drives supported
1 Floppy controller; 1.44 MB
2 x RJ45 LAN port
7x USB 2.0 / 1.1 compatible
2 rear + 2 headers ( 4 ports ) + 1 on-board
1x VGA Port
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Ports
1x Fast UART 16550 serial port
1x Header
Expansion Slots
1 (x8) PCI-E slot
1 (x4) PCI-E (using x8) slot
2x 32-bit 33MHz PCI (5V) slot
System BIOS
8Mb Flash EEPROM with Phoenix BIOS®
BIOS Features
Plug and Play (PnP)
DMI 2.3 support
PCI 2.2
ACPI 1.0/2.0
USB Keyboard support
Optional IPMI (Intelligent Platform Management Interface) 2.0
SuperDoctor® III
Watch Dog
W83793 H/W Monitor
Power Configurations
ACPI/APM Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode control for AC power loss recovery
Internal / External Modem Rign-on
Suspend to RAM (STR)
PC Health Monitoring
Monitors for CPU Cores +1.8V, +3.3V, +5V, ±12V, 3.3V Standby, 5V Standby, VBAT
CPU 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
Adjustable CPU clock frequency ratio (Only available if CPU is supported)
Total of six 4-pin fan headers
6 fans with tachometer monitoring
Status monitor with firmware speed control
Low noise fan speed control
Status monitor for on/off control
Support 3-pin fans (without speed control)
Pulse Width Modulated (PWM) fan connector
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor 2 (TM2) support
CPU / System Overheat LED
Suspend state indicator LED
Standby Power alert LED
Other Features
Chassis Intrusion Detection
Chassis Intrusion Header
Operating Environment
Environmental Spec.
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)



Back to top
KIT X7SBL-LN2 - Core 2 Quad 2.66GHz (Q8400) - 4GB DDR2 800MHz

Reviews about this KIT X7SBL-LN2 - Core 2 Quad 2.66GHz (Q8400) - 4GB DDR2 800MHz (0 reviews)

There is no review for this item, add the first one.
[Add your review]
Back to top