Advanced Search

RUBY-9712VG2A

Reference -oicp-ruby-9712vg2a
Rating:0 opinion
429.00 € Exclu. VAT
Quantity : 
+
-
Warranty  Warranty 1 year

µATX Motherboard for Intel® Pentium®4 Celeron®D processors (LGA775), up to 2 GB SDRAM 400/333, 3x SATA, 2Gbe LAN, 4 PCI, VGA, 2 ports Com, 6 USB 2.0.

Add to cart

Ask an estimate

RUBY-9712VG2A
Notice

Features


1- Industrial mainboard in uATX form factor thatsupports Intel® Pentium® 4 processor with
 Hyper-Threading technology and Celeron® D processor in LGA-775 package

2- Support most cost-effective DDR 400/333 SDRAM up to 2GB in dual channel architecture
3- Intel® new integrated engine GMA 900 provides  better display quality and effects thru faster engine and SGI OpenGL 1.4, Microsoft DirectX 9.0 supported
4- Four 32-bit PCI expansion slots for most industrial I/O cards
5- Dual Gigabit Ethernet port that based on PCI Express x1 interface without sharing bandwidth of PCI expansion bus
6- 7.1 channel High Definition audio output featuring high performance multimedia experience to gaming, voice recognition and audio conferencing applications

 
 

Product Description


Processor

CPU & Package: Intel® Pentium® 4 or Celeron® D processor in the LGA-775 package

FSB: 800/533MHz


Chipset

Intel® 915GV and ICH6


Memory

Up to 2GB DDR 400/333 SDRAM on two 184-pin DIMM sockets


BIOS Award BIOS


Display

- GMCH integrated Intel® Graphics Media Accelerator 900 (Intel® GMA 900)
- Dynamic share system memory up to 224MB (Intel® DVMT 3.0) or static share system memory up to 128MB
- Display resolution up to 2048x1536 @ 85Hz refresh
- Provide incredible visual quality, smooth video playback, and support for key 3D features


Ethernet

- Dual 10BASE-T/100BASE-TX/1000BASE-T Ethernet
- PCI Express x1 interface based Gigabit Ethernet
- Dual RJ-45 connectors with two LED indicators at rear I/O panel


Audio

AC’97 2.3 Audio


Expansion Interface

- Four 32-bit PCI expansion slots
- Up to four PCI Express x1 slot (optional)

EIDE

Support two EIDE devices with Ultra DMA 100/66/33


Solid State Disk

- One Type II CF socket
- On Primary EIDE channel
- Bootable for no drive on primary channel

 

I/O INTERFACE

- Support three SATA 150 drives
- Two serial (RS-232x1, selectable RS-232/422/485 x1) at rear I/O panel
- Six USB 2.0 ports (Four ports at rear I/O panel; two ports internal)
- One D-sub 15-pin VGA out and one RCA SPDIF out at rear panel I/O panel
- One parallel, one IrDA
- 8 high driving GPIO (4 GPI/GPO programmable, 4 GPO)

 

Hardware Monitoring

System monitor (fan, temperature, voltage)


Watchdog Timer

Programmable via software from 0.5 sec. to 254.5 min.


Power Requirement

Typical: +5@2.0A; +12V(CPU)@7.4A, +12V(System)@7.7A


Mechanical

Dimension : 243.8(L) x 243.8(W) mm; 9.6"(L) x 9.6" (W)
PCB : 4-layer


Environment

Operating Temperature: 0 to 55°C
Storage Temperature: -20 to 80°C
Relative Humidity: 5% to 90%, non-condensing
Approval CE, FCC Class A

 

 

DATASHEET

Back to top
RUBY-9712VG2A
Notice

Reviews about this RUBY-9712VG2A (0 reviews)

pixel_trans
There is no review for this item, add the first one.
pixel_trans
pixel_trans
[Add your review]
Back to top