Que recherchez-vous ?


Référence - oicp-ruby-9712vg2a
Note moyenne : 0 avis
629.00€ HT
Garantie :   Garantie : 1 an

Carte Mère µATX pour processeurs Intel® Pentium®4 Celeron®D (LGA775), jusqu'à 2 GB SDRAM 400/333, 3x SATA, 2Gbe LAN, 4 PCI, VGA, 2 ports Com, 6 USB 2.0.

Demander un devis

Notes et avis


1- Industrial mainboard in uATX form factor thatsupports Intel® Pentium® 4 processor with
 Hyper-Threading technology and Celeron® D processor in LGA-775 package

2- Support most cost-effective DDR 400/333 SDRAM up to 2GB in dual channel architecture
3- Intel® new integrated engine GMA 900 provides  better display quality and effects thru faster engine and SGI OpenGL 1.4, Microsoft DirectX 9.0 supported
4- Four 32-bit PCI expansion slots for most industrial I/O cards
5- Dual Gigabit Ethernet port that based on PCI Express x1 interface without sharing bandwidth of PCI expansion bus
6- 7.1 channel High Definition audio output featuring high performance multimedia experience to gaming, voice recognition and audio conferencing applications


Description du produit


CPU & Package: Intel® Pentium® 4 or Celeron® D processor in the LGA-775 package

FSB: 800/533MHz


Intel® 915GV and ICH6


Up to 2GB DDR 400/333 SDRAM on two 184-pin DIMM sockets



- GMCH integrated Intel® Graphics Media Accelerator 900 (Intel® GMA 900)
- Dynamic share system memory up to 224MB (Intel® DVMT 3.0) or static share system memory up to 128MB
- Display resolution up to 2048x1536 @ 85Hz refresh
- Provide incredible visual quality, smooth video playback, and support for key 3D features


- Dual 10BASE-T/100BASE-TX/1000BASE-T Ethernet
- PCI Express x1 interface based Gigabit Ethernet
- Dual RJ-45 connectors with two LED indicators at rear I/O panel


AC’97 2.3 Audio

Expansion Interface

- Four 32-bit PCI expansion slots
- Up to four PCI Express x1 slot (optional)


Support two EIDE devices with Ultra DMA 100/66/33

Solid State Disk

- One Type II CF socket
- On Primary EIDE channel
- Bootable for no drive on primary channel



- Support three SATA 150 drives
- Two serial (RS-232x1, selectable RS-232/422/485 x1) at rear I/O panel
- Six USB 2.0 ports (Four ports at rear I/O panel; two ports internal)
- One D-sub 15-pin VGA out and one RCA SPDIF out at rear panel I/O panel
- One parallel, one IrDA
- 8 high driving GPIO (4 GPI/GPO programmable, 4 GPO)


Hardware Monitoring

System monitor (fan, temperature, voltage)

Watchdog Timer

Programmable via software from 0.5 sec. to 254.5 min.

Power Requirement

Typical: +5@2.0A; +12V(CPU)@7.4A, +12V(System)@7.7A


Dimension : 243.8(L) x 243.8(W) mm; 9.6"(L) x 9.6" (W)
PCB : 4-layer


Operating Temperature: 0 to 55°C
Storage Temperature: -20 to 80°C
Relative Humidity: 5% to 90%, non-condensing
Approval CE, FCC Class A





Retour en haut
Notes et avis

Avis des internautes sur RUBY-9712VG2A (0 avis)

Il n'y a actuellement aucun avis pour cet article, soyez le premier à donner le votre.
[Ajouter votre commentaire]
Retour en haut