Que recherchez-vous ?


Référence - oicp-mbd-x7dwn+
Note moyenne : 0 avis
599.00€ HT
Garantie :   Garantie : 1 an

Carte Mère format ATX étendue Dual 771-pin LGA Sockets pour processeurs Intel® Quad & Dual Core 64-bit Xeon, jusqu'à 128GB DDR2, 2 Gbe LAN, 6 SATA-II, IPMI, 5 USB 2.0, VGA

Ajouter au panier
Demander un devis

Notes et avis


1. Dual Intel® 64-bit Xeon® Quad-Core or   Dual-Core, with 1600 / 1333 / 1066 MHzFSB
2. Intel® 5400 (Seaburg) Chipset
3. Up to 128GB DDR2 800* / 667 / 533 SDRAM Fully Buffered DIMM (FB-DIMM)
4. Intel® 82575EB Dual-port Gigabit Ethernet Controller
5. 6x SATA 3.0Gbps Ports via ESB2 Controller
6. 3 (x8) PCI-Express (2 w/ Gen 2.0),
    1 (x4) PCI-Express (Using x8 slot),
    2x 64-bit 133MHz PCI-X,
    1 UIO slots
    (Support Supermicro UIO Cards)
7. ATI ES1000 Graphics with 32 MB video memory
8. IPMI 2.0 (SIMSO) Slot

Description du produit

Physical Stats
Form Factor
Enhanced Extended ATX
13.05" x 13.68" (33.1cm x 34.7cm)
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
Quad-Core Intel® Xeon®Processor 5400/5300LV sequence (Harpertown/Clovertown processor)
up to 3.20 GHz
Dual-Core Intel®
Xeon®Processor 5200/5100LV sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz


System Bus
1600 / 1333 / 1066 MHz system bus
System Memory
Memory Capacity
Sixteen 240-pin DIMM sockets
Supports up to 128 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
Memory Sparing supported
Memory Type
800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
512 MB, 1GB, 2GB, 4GB , 8GB**
Memory Voltage
1.8 V or 1.5 V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
Intel® 5400 (Seaburg) chipset
Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux)
Support for Intelligent Platform Management Interface v.2.0 / 1.5
200-pin IPMI slot (SIMSO(+))
(Optional: AOC-SIMSO(+))
For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
Network Controllers
Intel® 82575 Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking
ATI ES1000 controller with 32 MB of video memory
Super I/O
Winbond 83627HG chip
Input / Output
Serial ATA
Six Serial ATA ports
Six SATA hard drives supported
Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
Compact Flash (40-pin connector, IDE 1, single channel) slot
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
1 Floppy controller; 1.44 MB
2x RJ45 LAN ports
2x USB rear ports
3x USB internal headers
Total 5 USB 2.0 Compliant / 1.1 Compliant
1x VGA Port
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Port / Header
1 Fast UART 16550 serial port
1 Serial header
Chassis ( Optimized for X7DWN+ )
2U Chassis
(Air shroud, MCP-310-82502-0N, need to order separately)
Tower / 4U Rackmount
Important Chassis Notes
To ensure system stability, a 550W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
Expansion Slots
3 (x8) PCI-e slots (2 w/ Gen 2.0)
1 (x4) PCI-e slot (Using x8 slot)
2x 64-bit 133MHz PCI-X (3.3V) slots
1x UIO slot
System BIOS
8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
Optional IPMI (Intelligent Platform Management Interface) 2.0
SuperDoctor® III
Watch Dog
Power Configurations
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode for AC power recovery
PC Health Monitoring
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby,
+5V Standby, VBAT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
Total of eight fan headers supporting up to 8 fans
Four 4-pin fan headers
Four 3-pin fan headers
8x fans with tachometer status monitoring
Status monitor for speed control
Support 3-pin fans
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x fan connectors
Thermal Monitor 2 (TM2) support
CPU / System Overheat LED
Other Features
Chassis intrusion detection
Chassis intrusion header
SDDC Support
Operating Environment
Environmental Spec.
Operating Temperature: 10° to 35°C (50° to 95°F)
Non-operating Temperature: -40° to 70°C (-40° to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)


Retour en haut
Notes et avis

Avis des internautes sur MBD-X7DWN+ (0 avis)

Il n'y a actuellement aucun avis pour cet article, soyez le premier à donner le votre.
[Ajouter votre commentaire]
Retour en haut