Advanced Search

MBD-X7DCA-L

Reference -oicp-mbd-x7dca-l
Rating:0 opinion
Quantity : 
+
-
Warranty  Warranty 1 year

Proprietary Motherboard Dual 771-pin LGA Sockets for Intel® Quad & Dual Core 64-bit Xeon processors
up-to 48GB DDR2
2 Gbe LAN
6 SATA-II, 8 USB 2.0

Ask an estimate

MBD-X7DCA-L
Notice

Features


1. Dual Intel® 64-bit Xeon® Quad-Core or Dual-Core, with 1333 / 1066 MHz FSB
2. Intel® 5100 (San Clemente) Chipset
3. Up to 48GB  667 / 533 MHZ DDR2 ECC Register SDRAM
4. Intel® 82573L Dual-port Gigabit Ethernet Controller 
5. 6x SATA 3.0Gbps Ports via ICH9R SB Controller
6.  1 (x16) PCI-Express   1 (x8) PCI-Express 
     1 (x4) PCI-Express  (using x8 slot)
     1 x PCI 33MHz slot
7. High Definition 7.1 Channel Audio
8. XGI Z9s Graphics with 32MB DDR2 memory

9. 10" x 10" board size

 

Product description



Form Factor
Proprietary
Dimensions
10" x 10" (25.4cm x 25.4cm)
 
Processor/Cache
CPU
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
Quad-Core Intel® Xeon®Processor 5400/5300 sequence (Harpertown /Clovertown processor) up to 3.16 GHz
Dual-Core Intel® Xeon®Processor 5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
 
System Bus
1333 / 1066 MHz system bus
 
Operating System Sofware
​Supports 64-bit Operating Systems
​Supports 32-bit Operating Systems
 
System Memory
Memory Capacity
Six 240-pin DIMM sockets
Supports up to 648GB 667 / 533MHz DDR2 ECC Register SDRAM
Dual channel memory bus
 
Memory Type
667 / 533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
 
DIMM Sizes
512MB, 1GB, 2GB, 4GB, 8GB**
 
Memory Voltage
1.8 V only
 
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
Intel® 5100 (San Clemente) chipset
Intel® ICH9R
 
SATA
Intel ICH9R  SB  SATA II Controller
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux)
 
Network Controllers
Dual Intel® 82573L Single Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
 
Graphics
XGI Z9s Graphics with 32MB DDR2 memory
 
Super I/O
Winbond 83627DHG chip
 
Clock Generator
ICS9LPR501 chip
 
Input / Output
Serial ATA
Six Serial ATA ports
Six SATA hard drives supported
 
IDE
Single EIDE channel supports up to two UDMA IDE devices 
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
 
Floppy
1 Floppy controller; 1.44 MB
 
LAN
2x RJ45 LAN ports
 
USB
4rear + 2 Type A connector + 1 headers (2Ports)
Total 8 USB 2.0 Compliant 
 
VGA
1x VGA Port
 
Keyboard / Mouse
PS/2 keyboard and mouse ports
 
Serial Port / Header
1 Fast UART 16550 serial port
1 header
 
Chassis ( Optimized for X7DCA-L )
Mid tower
CSE-733TQ-645
CSE-733TQ-485
CSE-733T-645
CSE-733T-485
Tower/ 4U Rackmount
CSE-743T-645 (FAN-0091, CBL-0088 Required)
CSE-743i-645 (FAN-0091, CBL-0088 Required)
CSE-742T-650
Important Chassis Notes
To ensure system stability, a 500W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
 
Expansion Slots
PCI-Express
1 (x16) PCI-Express  
1 (x8) PCI-Express 
1 (x4) PCI-Express (using x8 slot)
 
PCI
1x 32-bit 33MHz PCI (5V)Slot
 
System BIOS
BIOS Type
16Mb Flash EEPROM with Phoenix® BIOS
 
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0 / 3.0
USB Keyboard support
SMBIOS 2.3
 
Management
Software
SuperDoctor® III
Watch Dog
NMI
 
Power Configurations
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
Internal / External modem ring-on
 
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT,
HT, Memory, Chipset Voltages.
4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
 
FAN
Total of Six 4-pin fan headers 
6x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
 
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 6x fan connectors
PSU I2C temperature sensing logic
 
LED
CPU / System Overheat LED
Suspend-state indicator LED
+5V Standby alert LED
 
Other Features
Chassis intrusion detection
Chassis intrusion header
 
Operating Environment
Environmental Spec.
Operating Temperature: 10° to 35°C (50° to 95°F)
Non-operating Temperature: -40° to 70°C (-40° to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)

 

Back to top
MBD-X7DCA-L
Notice

Reviews about this MBD-X7DCA-L (0 reviews)

pixel_trans
There is no review for this item, add the first one.
pixel_trans
pixel_trans
[Add your review]
Back to top