Form Factor
Proprietary
Dimensions
13." x 8.1" (33.02cm x 20.57cm)
Processor/Cache
CPU
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
Quad-Core Intel® Xeon®Processor 5400/5300 sequence (Harpertown /Clovertown processor) up to 3.16 GHz
Dual-Core Intel® Xeon®Processor 5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
System Bus
1333 / 1066 MHz system bus
Operating System Sofware
​Supports 64-bit Operating Systems
​Supports 32-bit Operating Systems
System Memory
Memory Capacity
Six 240-pin DIMM sockets
Supports up to 48GB 667 / 533MHz DDR2 ECC Register SDRAM
Dual channel memory bus
Memory must be populated in pairs
Memory Type
667 / 533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
1GB, 2GB, 4GB, 8GB**
Memory Voltage
1.8 V only
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
Intel® 5100 (San Clemente) chipset
Intel® ICH9R
SATA
Intel ICH9R SB SATA II Controller
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux)
IPMI
Support for Intelligent Platform Management Interface v.2.0 / 1.5
200-pin IPMI slot (SIMSO(+))
(Optional: AOC-SIMSO(+))
Network Controllers
Intel® 82575EB Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking
Graphics
ATI ES1000 controller with 32 MB of video memory
Super I/O
Winbond 83627HF chip
Clock Generator
CK505 chip
Input / Output
Serial ATA
Six Serial ATA ports
Six SATA hard drives supported
IDE
Single EIDE channel supports up to two UDMA IDE devices
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
1 Floppy controller; 1.44 MB, 2.88MB
LAN
2x RJ45 LAN ports
USB
2 rear + 1 Type A connector + 2 headers (3Ports)
Total 6 USB 2.0 Compliant / 1.1 Compliant
VGA
1x VGA Port
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Port / Header
1 Fast UART 16550 serial port
|
|
Chassis ( Optimized for X7DCU )
1U Chassis
CSE-815TQ-R650U
CSE-815S-560U
CSE-812L-520U
2U Chassis
CSE-823MTQ-R700U
CSE-825MTQ-R700U
CSE-825TQ-R700U
Important Chassis Notes
To ensure system stability, a 550W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 20-pin are required]
Expansion Slots
PCI-Express / PCI-X / UIO
Left Side
1 (x8) PCI-Express + 1 UIO slots or
1 (x16) PCI-Express
Right Side
1 (x8) PCI-Express
For 2U configuration, Please go to UIO Riser Cards page
System BIOS
BIOS Type
16Mb Flash EEPROM with Phoenix® BIOS
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
Management
Software
Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0
SuperDoctor® III
Watch Dog
NMI
Power Configurations
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
Internal / External modem ring-on
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT,
HT, Memory, Chipset Voltages.
6 Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
Total of eight 4-pin fan headers supporting up to 8 fans
8x fans with tachometer status monitoring
Status monitor for speed control
Support 3-pin fans (w/ speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x fan connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED
CPU / System Overheat LED
Suspend-state indicator LED
UID
Other Features
Chassis intrusion detection
Chassis intrusion header
SDDC Support
Operating Environment
Environmental Spec.
Operating Temperature: 10° to 35°C (50° to 95°F)
Non-operating Temperature: -40° to 70°C (-40° to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
|