Advanced Search

MBD-X7DVL-L

Reference -oicp-mbd-x7dvl-l
Rating:0 opinion
Quantity : 
+
-
Warranty  Warranty 1 year

Proprietary Motherboard Dual 771-pin LGA Sockets for Intel® Quad & Dual Core 64-bit Xeon processors
up-to 24GB DDR2
2 Gbe LAN
4 SATA-II, 4 USB 2.0, VGA

Ask an estimate

MBD-X7DVL-L
Notice

Features


1. Dual Intel® LV 64-bit Xeon® Quad-Core or Dual-Core, with 1066/1333 MHz FSB (90 Watt or Lower CPUs Only)
2. Intel® 5000V (Blackford VS) Chipset
3. Up to 16GB DDR2 667 & 533 SDRAM Fully Buffered DIMM (FB-DIMM)
4. Two Intel® (ESB2/Gilgal) 82563EB Dual-port Gigabit Ethernet Controller
5. 4x SATA 3.0Gbps Ports via ESB2 Controller
6. 1 (x8) PCI-Express,
    1x 32-bit 33MHz PCI
7. XGI Volari™ Z7 with 16MB video memory
 

Product description


Physical Stats
Form Factor
Proprietary
Dimensions
9.6" x 10" (24.4cm x 25.4cm)
 
Processor/Cache
CPU
Dual 771-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same
type below:
Quad-Core Intel® Xeon®Processor 5400/5300 sequence (Harpertown/Clovertown processor) up to 3.16 GHz
Dual-Core Intel® Xeon®Processor 5200/5100/5000 sequence (Wolfdale/Woodcrest/Dempsey processor) up to 3.40 GHz

 

System Bus
1333 / 1066 / 667 MHz system bus
 
Operating System Software
Supports 64-bit Operating Systems
Supports 32-bit Operating Systems
 
System Memory
Memory Capacity
Four 240-pin DIMM sockets
Supports up to 16 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
Memory must be populated in pairs
 
Memory Type
667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
 
DIMM Sizes
256 MB, 512 MB, 1GB, 2GB, 4GB
 
Memory Voltage
1.8V only
 
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
Intel® 5000V (Blackford VS) chipset
MCH + ESB2
 
SATA
Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows Only)
RAID 0, 1, 10 support (Linux)
 
Network Controllers
Two Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
 
Graphics
XGI Volari?Z7 16MB
 
Clock Generator
ICS932S401EGLF
 
Super I/O
Winbond 83627HG chip
 
Expansion Slots
PCI-Express
1 (x8) PCI-e slot
PCI
1x 32-bit 33MHz PCI (5 V) slots
 
Input / Output
Serial ATA
Four Serial ATA ports
Four SATA hard drives supported
 
IDE
Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S)
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
 
Floppy
1 Floppy controller; 1.44 MB
 
LAN
2x RJ45 LAN ports
 
USB
2x USB rear ports
1x USB internal headers for 2 ports
Total 4 USB 2.0 Compliant / 1.1 Compliant
 
VGA
1x VGA Port
Keyboard / Mouse
PS/2 keyboard and mouse ports
 
Serial Port / Header
1 Fast UART 16550 serial port
1 Fast UART 16550 serial header
 
Chassis ( Optimized for X7DVL-L )
1U Chassis
CSE-512F-280B
CSE-512F-520B
CSE-512F-520LB
CSE-513L-420
CSE-811i-280
CSE-811i-410
CSE-811i-520
CSE-811TQ-280
CSE-811TQ-520B
CSE-813MT-410C
CSE-813MTQ-280C
CSE-813MTQ-520C
2U Chassis
CSE-823T-R500LP
CSE-823TQ-550LP
CSE-823TQ-R500LP
CSE-825MTQ-R700LPB
Mid-Tower
CSE-733i-645
CSE-733TQ-645
Tower / 4U Rackmount
CSE-743TQ-865B
Important Chassis Notes
To ensure system stability, a 420W (minimum) ATX power supply
[8-pin (+12V) and 24-pin are required]
 
System BIOS
BIOS Type
8Mb Flash EEPROM with Phoenix® BIOS
 
BIOS Features
Plug and Play (PnP)
SMBIOS 2.3
DMI 2.3
PCI 2.2
ACPI 1.0
USB Keyboard support
Hardware BIOS Virus protection
 
Management
Software
SuperDoctor® III
Watch Dog
NMI
 
Power Configurations
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
Internal / External modem remote ring-on
 
PC Health Monitoring
Voltage
Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT
4-Phase-switching voltage regulator
 
FAN
Total of five 4-pin and 3-pin fan headers supporting up to 5 fans
5x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
 
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 5x fan connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
 
LED
CPU / System Overheat LED
Suspend-state indicator LED
+5V Standby alert LED
 
Other Features
Chassis intrusion detection
Chassis intrusion header
SDDC Support
 
Operating Environment
Environmental Spec.
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
 
Regulatory
FCC
Passed to meet FCC standard requirement

 

Back to top
MBD-X7DVL-L
Notice

Reviews about this MBD-X7DVL-L (0 reviews)

pixel_trans
There is no review for this item, add the first one.
pixel_trans
pixel_trans
[Add your review]
Back to top