|
Form Factor
Proprietary
Dimensions
16.4" x 6.5 " (41.66cm x 16.5cm)
Processor/Cache
CPU
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
Quad-Core Intel®
Xeon®Processor
5400/5300LV sequence (Harpertown
/Clovertown processor)
up to 3.20 GHz
Dual-Core Intel®
Xeon®Processor
5200/5100LV sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
System Bus
1600 / 1333 / 1066 MHz system bus
System Memory
Memory Capacity
Eight 240-pin DIMM sockets
Supports up to 64 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
Memory Sparing supported
Memory Type
800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
256MB, 512MB, 1GB, 2GB, 4GB, 8GB**
Memory Voltage
1.8 V or 1.5 V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
Chipset
Intel® 5400 (Seaburg) chipset
ESB2
Infiniband
Mellanox ConnectX IB Infiniband 20Gbps PCI-E 2.0 Controller
SATA
Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux)
IPMI
Support for Intelligent Platform Management Interface v.2.0, v.1.5 200-pin IPMI slot (SIMSO(+))
(Optional: AOC-SIMSO(+))
Network Controllers
2Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking
Graphics
ATI ES1000 controller with 32 MB of video memory
Super I/O
Winbond 83627HF chip
Clock Generator
CK410B
Input / Output
Serial ATA
Four Serial ATA ports
LAN
2x RJ45 LAN ports
USB
2x USB rear ports
2x USB internal headers
Total 4 USB 2.0 Compliant
VGA
1x VGA Port
Serial Port
1 Fast UART 16550 serial port
Infiniband
1External Infiniband Connector
|
|
Chassis ( Optimized for X7DWT-INF+ )
1U
SC808T-980
Expansion Slots
PCI-Express
1 (x16) PCI-e Generation II slots
System BIOS
BIOS Type
8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0/2.0
USB Keyboard support
SMBIOS 2.3
Management
Software
Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0
SuperDoctor® III
Watch Dog
NMI
Power Configurations
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
Internal / External modem remote ring-on
PC Health Monitoring
Voltage
Monitors for CPU Cores,+1.5V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby,
VBAT, HT, Memory, Chipset
6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
Total of four proprietary fan headers supporting up to 8 fans
8x fans with tachometer status monitoring
Status monitor for speed control
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x fan connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED
CPU / System Overheat LED
Other Features
Chassis intrusion detection
Chassis intrusion header
Operating Environment
Environmental Spec.
Operating Temperature: 10° to 35°C (50° to 95°F)
Non-operating Temperature: -40° to 70°C (-40° to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
